Eurocargo tector - not by diagnosis

[rimec]

hi
I tried to enter the diagnosis on a eurocargo tector using autocom but the diagnosis does not turn on, seems to not receive power from the outlet. I checked the numbering of poles of the cable ? everything seems to be ok.
do you have any tips?

[passione motori]

Hello, have you checked your power supply??

[blackwolf76]

Adapter cables for autocom are worth and what iveco worst of all. If you want to do something, you have to modificartelo, to the limit and see if you recover a diagram partially functioning that should go on the tector.

[sisco]

hello try this system is always that you have the socket 30-pin round
obd autocom iveco 30pin
4-5 29
16 30
15 1
2 2

[klajdin]

Sisco but the K-Line into the Obd socket is switched on pin 2 of Autocom ?
I have made head of the tests but not sn never be able to do a diagnosis on Iveco, on any model...

[sisco]

hello klajdin I that configuration did not, in fact I tried it, (I found it on a forum where I was looking for the one for the scania 4 series that I found and it works)? the guy says that it works 100%, the user rimec I posted the pinouts for the edc why? he is not allowed to? still download attachments, you place an image that contains the link to the old truck and the new, then thou shalt make me to know if it works

[klajdin]

Thanks a lot sisco but I can't see it myself..

[sisco]

Thanks a lot sisco but I can't see it myself..

I can say that I purchased the cables for autocom chinese and I tried the cable 30-pin connector on an iveco stralis and it worked, I have not been to see what I could do in the ecu why? I was interested to see if the connection with the ecu was right because with the cock, I was not able to do even id data, when I go back in the workshop I take the cable and check it with the multimeter cos? I tell you how exactly ? wired. hello to soon

[giuseppeturbo]

Through the scheme, you should see in the meantime if c'? the power connector on the side eurocargo specifically positive and negative if you turn lautocom you are already on a good track then check the lines happened to me and with a bmw 728 of 2002 round connector, these machines can have two lines k and I had to modify the plug in the test or the moon or the other, in fact, that the chinese sockets are worth.

[nox]

Unfortunately the pin out 24 volts iveco, there are 2 types that carry power are wrong, and depending on the pin out that has your cable nn works for you safe n'? the cock, the autocom see if these will help one