Read write Marelli 8F2.P2

[Rebound]

hi all!
I need to delete the fap on a Fiat Panda with ecu engine 8F2-P2...
Open this ecu ? somewhat risky, as the tool reads and writes to the serial?
Are in possession of mpps,galletto v53...
? can?

[Backgroop]

With the Mpps you do not have to read it, if it is a 70cv in K-line the you can read with the wing nut for the reading puts us almost an hour, while if ? Can-Bus makes you the virtual read or identify the ecu and you get the original file, otherwise the open, and the laws in j-tag with the cock, if you have a bit of familiarity not ? difficult, I'm testing a rooster v53 and I tried it on two mjt-8xx

[Rebound]

why? with the mpps ? risky?
I have to check the car...if ? 70cv I can read it at the bench with the rooster?
I read that the rooster law in the serial...to tour it would be better without the bellies of the ecu...

[max75]

if you can make a backup....or see if you already? this is a read-made tour ....*****s, with the rooster you should not have any problems in the serial....

[Rebound]

a clarification: mpps and the cock are clones
however, the car ? 55 kw

[faberecu]

I on the panda 8f2 b2 , 75 cv , I have had no problems... the rooster was reading in the little k-line , virtual file , with the tool injector all ok
I had to do an immo off , I made a virgin ... I was not able to write it with anything... I remove connect ktag law ... file to 00
I feel the 53 connects once in jtag ... then zero.. not the law ,I thought the ecu is damaged, exchange the body that was flooded , I read the micro-I transponder
I program the key, the car in motion!!!
on the punto evo no problem???? info I have seen that maybe you have to remove resistance from zero H on the cmd ??

[ema74]

I think that the kess v2 should do reading and writing via serial

[faberecu]

it is also the cock she has always done , but on this no!!!

[ema74]

I ask those more? expert than me on these cars having the gold you can? write the file to cut with mpps as you do on the g.point 6f3

[carlo abarth]

what year is the car???