Hello everyone I wanted an opinion on the esludione FAP if the better to drain or drain it out and put a straight pipe on the inside... And what are the differences...then the egr if after having excluded in the ecu, if the better tapparla and what are the differences.. Thanks a lot for your help
then to the egr just exclude it electronically, and just,for the fap, or put a straight pipe in place of the fap, or put the pipe straight into the fap if it is clogged otherwise it is better to keep it.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
l egr I the cap is from the ecu and physically,because if they have a p? km they start to leakOriginally Written by msport
well surely if you empty the fap have a slight vacuum to low with respect to the pipe.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
is the difference you feel low,but improves a p? at the top,according to me
It is true that eliminating the egr, low speed already? ? good the difference? if you put the tube you have to open the fap at least from one side, then solder everything instead if you emptied it, you can always grind them, leaving intact the original welds....
I mean if you put the tube in the fap or empty if and only if c' and' difference
I also prefer to put the tube when ? can eliminate the vacuum that can? cause no fap but I feel that the larger hole with the tip from side to side
Last edited by sno74; 09-09-2012 at 19:14
The tube and the best solution in terms of performance and if you empty the fap you lose just a little at the bottom
Unshared knowledge remains an end in itself.
many thanks...it was what I wanted to know, in fact, the bass loses a bit after the 2000 rpm and a bomb...and I have the fap emptied...
then placing the tube right should be good to go
Write permission
Quote