problem immo golf 4 1.6 sr

[giordano]

hi to all, I hope someone can help me sprogammare the immo of my golf 4 1.6 sr with control unit Siemens 5wp4371 03,I would like to know if as a programmer pu? fit a ezp2010, or a gq-4x, I can use a soic test clip, or do I have to unsolder and replace the eprom?
which software to use to re-program and where do I find the file sprogrammato to be inserted in the eprom? I thank anyone who has the patience to explain to me and help me.

[mike99]

Red ? pi? easy to find your PIN and make another key.

[dejanira17]

the eepron for me ? always better to dissaldarla risks of not doing damage , your programmers don't know them, I personally use elnec .
the epn does not have to change it, and for p to do immo off must have a software or you know someone who has, I know there are already? ready.

[giordano]

Thank you very much for having responded to me and that there are already you wondering if you can recommend a good program to use, type the telephone, or similar things for the programmer.

[dejanira17]

I prefer the elnec in my opinion ? pi? full , even china is fine but get the beeg proog+ is more than enough for what you need to do the beegproog normal ? out of production, then if you want to complete the whole buy a programmer, upa, and do all the rest.
made a beautiful sail on ****** and see the specifications.
hello at your disposal

[giuseppe1374]

the willem cq-x4 is very good I by time and go to the big-combine with a upa and xprog, and cover most of the work

[jolidj]

the gq-4x is just great. whore ( if you dont already zoccolata) read and write . and you don't fear