hello all I ask opinion on the mass air flow sensor or better on those famous patterns that are in a network made up of resistors and quaslche diode I can't remember exactly... then cut a few wires and connect them in another way...if you know if you need something, and if the machine improves anything ??
"thank you in advance...if you did not understand well what I'm saying, ' I can find the shema and attach it...
in the meantime, continue to participate in the forum constantly, then, surely, when you have all the requirements x download are sure that you will be able to solve your problem.Originally Written by Freddyecu
as already said by giarras if you participate in the forum you will be able to download what you need,also I ask you not to open the 2 post the same in 2 different sections, and to open the post in the appropriate section, which I now move,I thank you in advance.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
if you can remove the one in the section on gas ... I accidentally open them but I had to open it on the section disel...thank you in advance...or if you tell me how to close a discussion... llo I do
all fixed up.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
if the mass air flow sensor ? rottoi have to be replaced,though ? perfectly calibrated, c? the map, and you can intervene
Does not improve nothing is only when the maf and the fruit and should be replaced instead with this little show the values of the line
I personally tried it and I tell you that the maf is new and better
Unshared knowledge remains an end in itself.
Someone there is a hole... a little goes better, but then you ruin it permanently.
If the Maf ? new and works well, not c'? need to edit it otherwise it tricks the ecu into believing that the Maf face get more air and, therefore, the ecu injects more fuel by decreasing the ratio AFR with any smoke.
I don't know which model you have, I have one also with a variable resistance to the lives and works
Write permission
Quote