Page 1 of 2 12 LastUltima
Results 1 to 10 of 20

View Hybrid

  1. #1
    BEGINNER
    Date Of Registration
    Dec 2013
    Messages
    11

    qashqai 1.5 diesel error P2263

    Hi guys I have a problem in my nissan qashquai virtually me ? on light engine red and the makkina loses power after 2200 rpm ? as if it goes in the recovery unit, I made a diagnosis and I ? came out error p2263 ( supply air) I checked all the hoses, the control valve of the wastgate, the air mass sensor ( bought it new) but nnt nn someone can? help me?

  2. #2
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    you may have the egr valve that is not working well and remains locked.
    ugo ---- president A.E.P.

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Nov 2013
    The resort
    sicily
    Messages
    179
    Citazione Originally Written by ugoboss Visualizza Messaggio
    you may have the egr valve that is not working well and remains locked.
    I think I also,try to see in the diagnosis if you quit.

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    276
    i agree with my colleagues unmount and a nice clean.....

  5. #5
    BEGINNER
    Date Of Registration
    Dec 2013
    Messages
    11
    Ok as soon as I can make? qst test we qst.

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    276
    If I remember correctly in this car in the diagnosis, you should find the reset egr....

  7. #7
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    27
    with the diagnosis you have tried on the road to monitor the turbo pressure? c'? a deviation between the actual pressure and objective ? if you ? positive or negative?? s? the pressure measured ? heavier than then you do not need to check it, the sleeves shall EGR... is not losing pressure, but the recovery ? this is probably due to an excess of pressure. make sure to check the actuator of the variable geometry! palette turbo blocked, solenoid failure, tube, depression, etc.. the rods of the turbo that controls the geometry moves..????

    PS. ? 1.5 DCI or 2.0 ? ... however, if recent, I find the mountains a variable turbine geometry and not to the wastgate. there are 2 types of management VGT... electric or pneumatic actuator... what??? check carefully to see that often crashes ;-) . ..let us know
    Last edited by leandro89; to 15-02-2014 11:25

  8. #8
    BEGINNER
    Date Of Registration
    Jun 2014
    Messages
    10
    Hi guys I also have the same problem : turbine new egr removed and clean control valve turbine new, but the machine does not make the sleeves and the tubes intact. I found a dirty oil close to the vacuum pump and pipe intercooler you can see a thin layer of clean oil. I do not know what to check.

  9. #9
    BEGINNER
    Date Of Registration
    Apr 2014
    Messages
    32
    you have to post the values of the diagnosis, however, usually when any of these errors is a problem with egr valve

  10. #10
    BEGINNER
    Date Of Registration
    Jun 2014
    Messages
    10
    Thanks x the answer fast. The egr valve ? clean like never before aecondo you could work wrong ? Can I exclude it only through the map right ?

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •