Hello guys, someone can? tell me if the body computer N 51781759 of the Fiat Grande Punto (199) 1.2 8v year 2006 is compatible with the one that fits the later model EVO. Change color, and also change the numbers. Or other categorical numbers are compatible as the original one do not find it used.
Thanks
no you can't mount it on both hardware and software are different, you will not work a lot of things already on gpunto if the color does not ? the same you have problems
they have two different electronic ... and then, nothing...
can you explain what's your problem? maybe we can find an alternative, then if you turn the body find it, I know that I would not have searched well
Thank you. The problem ? the following: sporadically during the implementation phase of motion is the light on the lock turned on and the starter does not attack.
If you detach the negative terminal of the battery for 10 seconds and the reattachment of the machine part.
I have already? replaced the engine control unit and checked all the electrical system, also tried to replace the antennina that reads the key.
When the defect is not in the diagnosis and when ? running stores can communication with engine ecu.
For these motovi I would like to find a body used to clone and try
You have to find the same body if you do not solve anything!!
You do not really understand something until you can explain it to your grandmother (Einstein)
Thank you. But to any of you ? gi? happened to this type of defect ?
you've replaced the battery with a new one just to test and see if the defect does???
What is a hare? A rabbit Abarth
The problem is not ? the body is speaking to you from experience, you have to check the wires that come out of the ecu fuses in the engine compartment, there are combs that carry voltage to the ecu on the engine.
There are the wires broken internally (so you don't see them) where the wiring ? fixed with the fascettine black to the support of the spine.
If when you are not part if I remember well) to the pin 1 or 16 you will not have voltage 12v tap the plugs and you respawn 12v
Checks to see if the set up ? an 8V with the Marelli 5SF
- pin n?16 ECM connector on the vehicle side = +15
- pin n?1 ECM connector on the vehicle side = +30
- pin n?5-6-21-22 ECM connector on the MOTOR side = the masses
Red wire green that goes from pin 1 ecu wiring yellow to pin 28 of the comb short fuse box UNDER THE COVER that connects to the fuse box.
Last edited by leandro89; 27-01-2014 to 05:44
Hello, is the battery ? new.
Now, however, I do additional checks in the control branch of the front as you have stated you RTS and then I'll know.
Thanks
Write permission
Quote