Hello, I have a problem with this car that the part on and off.
The diagnosis has decreed that the ECU is LOCKED.
It could be a problem with the code?
If yes, the code resides in the 93c56?
Hello, I have a problem with this car that the part on and off.
The diagnosis has decreed that the ECU is LOCKED.
It could be a problem with the code?
If yes, the code resides in the 93c56?
It could be a problem of code...***** s see the right ecu, why? the program brings the memory if the control unit has a connector only...To you how many you have..?
The ecu ? in this photo:
DSCF2265.jpg
I tried to read the eeprom not divide it, but my programmer is the law with all zeros;
I know that ? should unstick the eeprom for programming, but ? I read it not?
Also, what kind of memory ? 93c56 x8 or x16?
Last edited by msport (exil77grande); 14-01-2014 at 22:30
To program the EEPROM 93C76 16bit to me is thisOriginally Written by giary74
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Hello Legendary, I know that you are a guru in this field, but in my archives, I found this document that relates to an ecu like that mentions the 93c56:
siemens.jpg
According to you ? can make a scodifica total on this ecu?
then stop it, all the total on the 27c010 and I can confirm that there is' a total
93c56 me it is only with the ecu a plug and not ? in your case, read and post the contents of the flasks
Last edited by msport (exil77grande); 14-01-2014 at 22:31
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
That's why? I told you to see the unit....
the 27c010?
I have to dissaldarla to read it?
Have patience, but the willem I ? only arrived this morning and I've never done such as this.
I need to learn the settings of the willem; up until now I've used a simple USB programmer very practical.
the willem is this memory, select the type to move the jumer and read before you do, check where you put
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
you can remove it with hot air, even if the motherboard ? glued with silicone to the aluminum shell, or ? recommended the use of the welder?
Write permission
Quote