Good evening I have in the workshop a golf VI with error code p2009, inherent in the butterfly, unfortunately, texa does not tell me so, and the call center ? closed until 7 January, for? the customer would like the solution to the problem, if anyone ? happened this error could you tell me what to check why? I am undecided whether to jump on the throttle body or the mass air flow sensor with an error of reflection.
the butterflies motorized problems have always data, I sostituerei that and would check that is not also jumped the fuse.
ugo ---- president A.E.P.
I fully ugoboss are the butterflies that they lack, or to a short circuit due to oil seepage laurel internal or breakage of the gear, checked the fuse usually jumps in and does not leave even the fans
The patience and virtue of the strong..
I made a 2 weeks ago I replaced the throttle body because I found a pool of oil inside the electrical part. In my case the fuse was ok. Replaced the valve, reset the error and the machine ? like new again
Quoto what has been written before, the butterfly valve can also give you other errors I had one with P2112 and others but the problem ? almost always there or close to it...the egr
Hello rts, I had the same problem with the same error on a golf 6 series with ecu bosch edc17p14 and year these problems and solved by resetting all the parameters on both the egr and also the starter motor in the throttle then the learning of all of the 2 things mentioned...
exclude the butterfly from the control unit and you do not have more problems!!!!
I humbly ask, and I apologize for my lack of knowledge of so many things...I spighi how to do it?? Or better, what do you use to get to exclude the function??Originally Written by frantik3
Gick...I know that in a few days back and I speak from experience...? good luck.
With a lot of patience is excluded from the control unit and a feasible task
Ok then today I cleaned the butterfly egr and reassembled the whole zeroing error, the customer did not want to buy it new and not even my superior, how ? to exclude that they want to exclude it from the ecu, However, we have given the machine under test a couple of days and then will upgrade? the discussion
Write permission
Quote