luca stanca Doblò 1.3mj-85cv-3455D182-51839150

[Alecsx]

hi guys ,

luca stanca doblo I had a bit of grit, and I have lost the original files .

I reset the ecu bdm writing micro and flash that I have been provided with luca stanca and egr off and the auto part

now the ecu is not there is no error but the light engine and the message on the display indicate the dpf clogged.

[Alecsx]

I have to say that the fap was not physically deleted but usually defappo and the errors disappear and then remove the fap.

if they had been erased the dtc in flash I have a similar problem?

thanks ....

[Backgroop]

Caio not ? removed well, there are swich's related to the turning on of the indicator lamp mil, and DTC's) to delete in addition to the post-injections, and to the strategy of regeneration

[Alecsx]

the file I got from the forum so I think it is well done. the problem is more big ? that I can't write the micro correct why? what ? from 516 and I write 513 . someone throw me a micro of this ecu ? I still can't download anything.

[Backgroop]

Email the file with luca stanca, and we see the problem,which instrument would you write??

[Alecsx]

in theory, if the micro is currently in the ecu and of the same family software I should not have big problems to replace only the flash but since the car is 50 km away from the laboratory and the customer and in a hurry, I can't afford to mess something up.

[Alecsx]

I am writing with a cock v53 . currently c'? on a map that I spent a colleague . because I of my I can't write the micro. my the outlet from the forum so I guess it could be in big trouble.

[Backgroop]

the size of the flash and 2mb + the micro with the cock, v53 don't make the virtual read?? should return a file of about 2,5mb where is going to separate the part of the micro from the flash after the change to gather everything and write

[Alecsx]

2.5 Mb read them from the obd , but I am in the bdm with the rooster and read 2048, 513, 4.
even with ktag and the same reading.

[Alecsx]

possible that the only tool that reads the micro 516 and the bdm 100, and I can't find a micro bed or ktag or cock .