Written SAFE framework tools a3

[nokiaspace]

Hi all, I have made the scodifica total to my audi a3 140-horsepower 2.0 tdi ecu bosch.
Today afternoon I tried to put the instrument panel of an audi a3 170 bhp with ecu siemens to try if it worked the same (why? this framework has 32000km on a gift from a friend who has crashed the machine), the machine goes into motion the same? the framework leaves the words SAFE, and you can't even see the km partial.
Now I would like to know how can I do? according to you, doing the alignment with the cable vag you can make disappear the words safe?
then the instrument panel of the a3 170 hp and 140 hp respectively, bosch and siemens are interchangeable right?

[Antonio46]

I don't know if they are interchangeable... but according to me ? in protection since? you do not find the miles and the frame number equal to the control units communicating

[ergiaguaro]

It is possible that you are experiencing with the protection device if the panel has both mac other than that the code is a 7 digit number that can log in to the pi? the frame is different

[gezame]

It is possible that you are experiencing with the protection device if the panel has both mac other than that the code is a 7 digit number that can log in to the pi? the frame is different

Hello
Yes, of course.

[mhz2005]

you have to go to the frame in the new framework

[spiki_x]

I untapped in an A3 1.6 petrol, with a written Safe, and would not start , did not work, not even alzavetri.
I removed the immo and remained the writing. Then I resolder some of the framework and all, and back to normality.