immo off on opel corsa b 1.4 16v

[mecdoc]

hi guys
according to you ? possible to do immo off on opel corsa 1.4 16v with ecu delco 16214239
I tried various solutions on the micro, but do not work, or better to say, are scod. partial tot

[chicco]

to get the total you'll probably need to disconnect the wire of the code, you have a pinout of the ecu?

[sa80libero]

you have to cut the pin of the line code

[mecdoc]

I removed the transponder
? the same thing

[cicciocar]

according to me no! you should remove the ring for f? also from the box code..

then you do !

[mecdoc]

[QUOTE=cicciocar;65651]according to me no! you should remove the ring for f? also from the box code..

then you do !
also did this test and nothing
in the end I resolved
I coded tranponder t5

[ecutuningpro]

hello, with what you have to read the processor? for scodificarla you have to read with the upa, the eprom of the processor, not the flash and put it all to ff

[mecdoc]

hello, with what you have to read the processor? for scodificarla you have to read with the upa, the eprom of the processor, not the flash and put it all to ff

but have you tested this solution?

[SGHERRY]

hello,immokiller...go quiet!!

process what you've read in proc. and do not remove anything