GRande Punto 90hp Tips

[Frate]

Hi, I have never had to deal with this ecm me of the maps that don't know, and I don't trust what it says ecm, and for the press turbo to me from very small values compared to the volori absolute of, for example, edc16, do you have any suggestions?
Grande punto 1,3 90 Hp Mjtd P455

[Backgroop]

Hello email the file ori.. however the 1.3 mjet marelli 6jf 6ef 8df 8ef are very different in the maps from the classic edc16 Bosch.. to map these ECU's you need to know where to put your hands and how to do it otherwise you'll find? the with a machine that smokes and goes less of the original..

[voglioimparare]

e-mail the file in question, and let's figure out together what you have not clear some of the maps on this sw are out of driver,or maybe you have a driver in the ecm a bit outdated

[Frate]

Place the file

Use the Titanium 1.61

[ciroecla]

these ecu's are not in the ecm , mistakes a lot, and many of the maps do not exist in the ecm.
these maps, I only in winols and there is nothing better ( in my opinion ) to change the latter.
learned to use winols and believe me , you'll really, really well.

[mafani]

these ecu's are not in the ecm , mistakes a lot, and many of the maps do not exist in the ecm.
these maps, I only in winols and there is nothing better ( in my opinion ) to change the latter.
learned to use winols and believe me , you'll really, really well.

hello ciroecla you are right about the precision of winols but you have to always have the damos to know actually how it works every single corner,otherwise ? how to use the ecm according to me....

[infinityecu]

Hi, I have never had to deal with this ecm me of the maps that don't know, and I don't trust what it says ecm, and for the press turbo to me from very small values compared to the volori absolute of, for example, edc16, do you have any suggestions?
Grande punto 1,3 90 Hp Mjtd P455

Hello please I think that pi? what else is a matter of habit if you know a software and then you know what touch can do everything without problems :-)

[Elettrico]

I agree with ciroecla winols and one of the best just learn what you're touching, experience with ecm tells you one thing but in the meantime, tap another thing

[ugoboss]

I agree with ciroecla winols and one of the best just learn what you're touching, experience with ecm tells you one thing but in the meantime, tap another thing

I don't understand what you mean "with the ecm tells you one thing but in the meantime, tap another thing " if you edit a curve, the ecm will change the one that is not another thing, if you mean that the definitions are wrong then what is.

[enzopezzano]

Sure you have the damos with winols and much more? simple to understand what touches, but if you're pretico looking at the curves and the values on the axes you understand what you're doing. I have always mapped to the ECM and I'm happy, even with the marelli. All you need are the maps that are open to you the driver and you just already for a good map.