ECM Titanium - Choose the correct Driver!

[V.V.]

I tried to peek with titanium the file that I uploaded herebut the titanium suggests to me the

I believe, instead, that the family, the correct Driver is this (to me, seen the last three numbers

What I did not go back ? the CKS of the golds that I have read today, according to the information of the ECM Titanium!

Here are the questions:

Can I use the same driver in spite of the difference of the CKS (3DFA Vs 1B82 & B779) or should I intervene differently? In that case, how?

Thanks in advance!

[spiki_x]

Go quiet, The driver of the ECM are also general... for example, there are driver named 463.xxx - this means that you match on a number of hardware and many software numbers. I have already drawn up with the wrong drivers, but the maps right. The checsum then you correct the Mpps or cock.

A similar example and the chevrolet cruze, which has 2 versions from 125cv and 150 hp. The machines are identical down to the bone. Also the software in the ecu, and virtually identical. The only difference is the torque limiter, and then the checksum.

[gick]

also, according to me, you can go quiet, I don't know what kind of equipment it uses for reading and writing, but for example with the fg tech galletto version 53 of me says that when the checksum calculates him, it is written in a box of checksum that is calculated in writing and at that point we need to calculate the ecm.

[V.V.]

For read and write use MPPS v12 of the Forum. Thanks for the explanations, I try to lay hands on cos? then !

[voglioimparare]

go quiet,at the end of the titanium search for version hw and sw,and it still happened to me a similar thing. !

[gick]

invented name, message, invented, 80 messages jackpot

[msport (exil77grande)]

invented name, message, invented, 80 messages jackpot

can you illuminate for pleasure, thanks.

[ugoboss]

with your numbers hw and sw 148_120 the right driver is the one that gives you tita, the ones that you want to upload you are one of 150 hp, but they have numbers sw different, I don't think changes anything but' and' so.

[danielecolantonio]

guys but with ecm titanium c'? any way to check if the driver selected ? right?

[megamind]

Not c'? need to verify nothing usually ? in automatic, if you have a bit of an eye you can see if in 2d, the shape of the curve corresponds to the description of the map or open it on another program.