Iaw 16F scodifica from micro

[Gia]

Hi
I have to scodificare a iaw 16f.
Not having the interface, I Would like to try to read the motorola 68hc11 and process the file using software such as the telephone or immokiller.
Has anyone used this procedure? does it work?

Any advice? I can not do the procedure clock why? I don't have the car.
Advice?
Thanks

[alex68]

mandamela you do it no problem

[scinti]

Certainly I am attaching the procedure hello

[Gia]

Thanks for the reply! of course, if you don't link the immo make the total?

Another doubt I will. As ever, from the photos, the food, the ecu?

[scinti]

Sorry if I omitted the connections to the ecu,if they were to use pin 34 negative, pin 35 and 26 positive

[scinti]

Of course, you must disconnect the immo to the total, you'll find it above the fuse box for the power supply to the ecu I have a dedicated interface, and I don't follow this procedure ,a colleague of mine who does not have the interface you ? amused to complete this beautiful work, and I think that the power on the ecu is not obligatory, maybe he wanted to work with certainty not deafening nothing you can do the same thing hello.

[Gia]

What can I say! thanks a lot and good make

[Gia]

I tried to read the micro-x prog. It tells me the device Is silent. Who wants to say. The links are ok

[scinti]

I don't use xprog but I know that should read this micro,have you tried to power the ecu and not hello.

[Gia]

You!
among the many attempts that I have made, at a certain point he started to funzionatr, but he read an empty file (all ff), and also, if you write something, you do not write anything