Mount the injectors PD115 on a PD130

[virus1976]

As the title suggests I ask for consultation if ? possible to mount the injectors of a PD115 on a PD130.
I know that the question sounds strange(usually we do the opposite), but a friend has melted on the engine of his audi a4 and the only thing that ? managed to find a(cheap) ? another pd130 engine lacking the injectors. The mechanic that is doing the work ,it has 4 injectors of a pd115,and says that you can mount without problems to you is??

The abbreviation of the engine failed ? AVF what ? time was a AWX

thanks

[legendaryslave]

yes, I have done you can mount safely only flaw is you lose some pony in how many of the pulverizer and different

[virus1976]

legendaryslave thanks for the info, and then you don't do the damage !!!
according to you, it is worth while to recall the maps of duration and SOI of the pd115 on the map of the 130?
thanks

[legendaryslave]

legendaryslave thanks for the info, and then you don't do the damage !!!
according to you, it is worth while to recall the maps of duration and SOI of the pd115 on the map of the 130?
thanks

I would give qualchecosina to those of the 130, however, with a mappettina discreet I think that the loss is not known, in my case it was an elderly person, therefore, has not aneither heard the drop of power

[virus1976]

this morning they mounted the inettori of the pd115, the machine goes into the bike with no problems, but under 2500rpm ? a lung and has several vibration, any suggestions?

[alfajtd]

but the injectors are mounted previously been serviced properly?
why? likely not crumble well...
you might first removing the whole do a good cleaning with products and a specific...
and see if the problem reoccurs...

[ugoboss]

you also see how they were mounted and calibrated.

[legendaryslave]

unfortunately, we expected this problem

[virus1976]

after some test we took out the injectors and carried by a pompista to reviewing one of these has a code different from the others but for the pompista are equivalent.. tomorrow reassemble them and see what happens...

After cleaning the injectors and replacing the one with the P/N is different, the machine has more? vibration, remains ugalmente dead at low revs while the top does not seem to have lost granch?.
thanks to all for the advice

[alfajtd]

Great....

Possibly affinala from the map...