Hi guys...I read my Suzuki Swift 1.3 75hp. The file that is read by galletto ? 2mb for? while leafing through it, I was not able to find the area of the maps the pedal. Why?? The file ? correct?
In the attached file...
Last edited by msport (exil77grande); 18-07-2013 at 10:19
Hello, ? happened to me, in these the file that is read from the serial should be 2.5 not 2, for this is missing some maps.
The flaw in the bdm and you'll see that c'? all, I do not trust to write what you read
Mmm, but I found another file (the entire file over the network, from the 2mb that for? shows the maps of the pedal. As you said, I don't trust even myself to write...
I try to make another reading from serial port? It seems to me that the interface would select the WHOLE or TABLES...
Hello Danny, this obd ecu even if you select a table or the entire always a file of 2.5 Mb you have, I doubt that the files from the 2 mega you were able to read it by obd is usually seen that the sw ir? the town does not recognize the file, you cut it to 2 mega, is recognized and you can work it, of course, you need to re-reverse procedure to be able to rewrite the file is 2.5 Mb. I have written a dozen of these ecu with the tool v2 never had problems with the block.
the rooster on these must-read file-2.5 mb!
if you have found a file from 2mb ? been read in bdm or serial communication with another tool.
read it with kess, or go bdm with cock
After I try to do the other reading from the serial port. If it does not, the avr? my first bdm uk. the other reading, I think it was made with the kess, but did not ? at my disposal..
Reread, not in the table, and pulled me out of a file of 2.5 mb....! I edit and I write this? I have not had the time to check for? what c'? inside.....
Yeah, it seems to me 84 minutes... But in writing there is the same? Otherwise, until it ends, sar? a batticuor... AAltra thing. Having the file, 2.5 mb,if you were to crash in serial, you recover in the bdm?
the other reading, I think it was made with the kess, but did not ? at my disposal..
Write permission
Quote