problem sid 803 peuget

[fuorigiri]

hi I have a thing very strange about this ecu siemens sid803 mounted on peuget 307 20hdi I go x to read the ecu with bdm and almost at the end of the reading is in error and crashes issue the most part, but the machine I repeat are reading what could it be ?

[pinotec]

strange ,I have that car and I did a lot of experiments , if not part of the machine and the reading of the bdm crashes I would not like you have damaged the ecu or corrupted e2p
anyway, with that tool you are reading?
in the diagnosis of mistakes?

[explode82]

if you are not part of the pi? ? easy is corrupt the file if no does not explain the error in the reading, even if it seems to me, really is a strange thing,try changing the bdm

[legendaryslave]

Something very abnormal and dead ecu ? However, do id you can write to another file

[fuorigiri]

guys solved in the weld strip was something in short perhaps in the bdm thanks anyway for the help x

[giuseppe89]

hi all I am trying to read a sid 803 of ford c max 2.0 tdci that I have recovered for us to practice,I've however problems with the reading of the same,I found using the multimeter on the pin 1,which is the one located in the top left having the ecu under the template with the spinottiera to me...connecting according to this reference, however, I can't even do the id...I fed from the comb as shown in the documents of the cock, but nothing,is wrong...I forgot, having the adapter of the template 8 tips to spring I left port bdm a couple of pitches, which is not connected,or the bottom according to the location of the first.Where am I doing wrong??

[cinqueturbo]

hi all I am trying to read a sid 803 of ford c max 2.0 tdci that I have recovered for us to practice,I've however problems with the reading of the same,I found using the multimeter on the pin 1,which is the one located in the top left having the ecu under the template with the spinottiera to me...connecting according to this reference, however, I can't even do the id...I fed from the comb as shown in the documents of the cock, but nothing,is wrong...I forgot, having the adapter of the template 8 tips to spring I left port bdm a couple of pitches, which is not connected,or the bottom according to the location of the first.Where am I doing wrong??

Upload a photo?

[BlackFog]

hi all I am trying to read a sid 803 of ford c max 2.0 tdci that I have recovered for us to practice,I've however problems with the reading of the same,I found using the multimeter on the pin 1,which is the one located in the top left having the ecu under the template with the spinottiera to me...connecting according to this reference, however, I can't even do the id...I fed from the comb as shown in the documents of the cock, but nothing,is wrong...I forgot, having the adapter of the template 8 tips to spring I left port bdm a couple of pitches, which is not connected,or the bottom according to the location of the first.Where am I doing wrong??

Upload a photo so at least it will be easier to help you ��

[giuseppe89]

Okay guys tonight I will post as soon as I get back from work

[giuseppe89]

photos ecu.rar here are the photos of the link,even if in the first time I have linked the schedule to the spring, leaving the two empty plots on the bottom while in the picture are left blank, those at the top or from the side of the pin 1. I'm starting to think that is some oroblema to the e xxx, but still I have doubts on how to make the connections to the various ecus