I ask you opinion on the map astra 1.7 cdti z17dth ecu bosch edc16c9 943_268

[andrew64]

hi all a friend of mine has a astra sw 1.7 cdti ecu edc16c9 943_268
I have read the ecu with mpps v5 and gives me a strange file 1 mega despite the fact that the programmer said that he wrote only the ecu
I've got a file read with bdm 943_268 always a mega and comparing it were very different to open the file with the drivers of the ecm 1.61 but I don't know what to change why? ? the first time I open a edc16c9

appeal

to an expert who will give me advice what to change to make it more lively, and the change should be made on the file that is read, or what are procured from the bdm and if I write that procuratodopo you have changed with your help there is a risk that the lock ecu ?

[mafani]

hello ma ? the first time you open a file, edc16c9, or the first time that you have to mod a file?because c9, or both ? always a edc16 bosch so the maps are always the ones. if you do start to do something, or at least what you know and then post the mod that you will be helped where you are having difficulties

[SandroMarciano]

for the speech reading, I follow the philosophy of always write the read file with the same instrument and on the same machine... specifically if you have perplessit? read in bdm the ecu, cos? you can always go back...

For the map as he said mafani ? a classic edc16... parts from the maps pedal, torque limiters, lambda turbo, limiter, turbo, and if c'? need rail and advance

[andrew64]

the file that I bought ? read by bdm my perplessit? this comes from the fact that comparing the two files, the file read with mpps has straight lines and in the other there are curves, and as if mpps had not read well, and I believe the first part of the file , if you lock the ecu with the file there? I can unlock in the bdm? I'm attaching the file before editing

[SandroMarciano]

the file that I bought ? read by bdm my perplessit? this comes from the fact that comparing the two files, the file read with mpps has straight lines and in the other there are curves, and as if mpps had not read well, and I believe the first part of the file , if you lock the ecu with the file there? I can unlock in the bdm? I'm attaching the file before editing

I'm sorry, but comparing it with the file posted at the beginning of the discussion we do not understand nothing, from which the original six-party?

[cinqueturbo]

I'm sorry, but comparing it with the file posted at the beginning of the discussion we do not understand nothing, from which the original six-party?

And the problem is that the ori BDM and the ori MPPS are not so compatible..
I would recommend to wash away the specific, the cio? or ways to read with BDM or ways reading MPPS
and write that to the bed.
even s? I have to say that the reading of MPPS does not convince me so much..

[SandroMarciano]

I have not seen the file, but the straight lines of which you speak in the file that is read with mpps are to be attributed to the partial reading that is the tool of diagnosis. If you trust the backup bdm you then go quiet! However, if for some reason I lose the contents of the keys, encoding injectors etc etc you should scodificare the map read by bdm (from a friend), before writing, but if I had your you could upload it without worries!

[andrew64]

hello sandromarciano
thank you for your helpfulness? and info
if I take the file that is read with mpps and reconstruct the missing part would be better to rewrite this after moddato?
you may give a look at the mod files and give me some advice ? I would not do damage .

[msport (exil77grande)]

I advise you not to write this mod.

[andrew64]

and I cosiglieresti ?
where ? wrong