Hi all!
for those who have a bit of time by myself, I would give a judgment on this map?
I'm ready for any criticism and, above all, the council...
Hi all!
for those who have a bit of time by myself, I would give a judgment on this map?
I'm ready for any criticism and, above all, the council...
try it...you will not feel a big difference in terms of performance, however, all in all okay.
you touched on the map the right way.
there are still many maps to edit in 2d, type nm on iq, lambda and torque limiters for running, but in a map soft like this that I could define a STEP 1, not ? need to touch them
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
The Great Magi!!! and an honor to have a commentOriginally Written by magi1984
but according to you, what are we? pulled out in hp?
and can you give me some info on a step2 if not too much to ask?
or where I can find what you need in 2D?
meanwhile, I thank you....
1CA21C lambda
1cb734 torque limiter
1cde2c, and to follow the torque limiter in a single gear
1E4BDC? a limiter as a function of intake air temperature, you have changed from 65? ... I would, on the contrary
1e8774 and the following, as many believe they are not torque limiters, are the PID controller of the pressure diesel, you will have empty...
I let the time of the original, but I would give increases to the pedal up to 450Nm, torque limiters accordingly, and the map lambda the stoop very much, close to 1000punti (of course, if the car has no fap,but if I'm not mistaken should not mount it to the 90hp)
cinqueturbo don't exaggerate, I'm not jean todd
let's say that, speaking in terms of %, on the accelerator pedal, you can safely give double the number of increments that have given you.
adapting the course also torque limiters, including torque limiters for gear that are at the address 1cbe2c, I believe that sandro has made an error in typing a letter
currently limit the torque at 2500, the cio? 250nm. edit, based on the maximum value obtained in the maps accelerator pedal
the map lambda you can lower it a hundred points
1e8774 forgive her original
in the rail pressure c'? an error, have increased by 50 points for the cio? of 5bar... according to me you wanted to increase it to 50 bar and the cio? 500 points
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
Guys Thanks!!
now I put? straight to work!
with your directions sistemer? the errors on this map stepp1,
and a lighthouse stepp2 to increase a little more?,
the customer may not even want to try a pi? aggressive,
I'll have to check below
Thanks again....
torque limiters I was wrong to write in, to the address written by the magi, the step 1, that is, the one you posted you will feel as soon as change, I suggest you to try one step more? pushed!
Thanks Sandro!!!
and Still
Thanks Magi!!!
I'm working on, and I have a bit senile with the lim. the couple and the map lambda..
I'm trying to understand something..
then, in practice, the torque limiters ragionaci like you do with the pedal, or if you want to 300Nm, for example, make sure that you ask for something more? from the pedal, then the limits with the torque limiter, in fact. the maps lamda if you don't have the dpf, I advise you to clear all 1000punti, that I did not smoke even a little bit... in that way...
I think I understand the concept..
but problems or to interpret the torque limiters for gear that are out of the driver..
I don't know where to start, I see 7-speed.. and not or understand where the 1 or the Reverse, and what indicate the dec..
or made a screen for you to understand my question...
Write permission
Quote