hello guys as the title I have a grandepunto is driving me crazy to figure out why? low reggimi and slowly walking down the machine to a seghettamento continuous and annoying someone can direct me what I should check?? and a fiat grande punto 1.3 multijet. I put the data of the controller if it can help.
Fiat Hardware Number: 51806498
Marelli Hardware Number: MJD6F3HW03P
Marelli Software Number: 3442P766
Fiat Identifacation Number: 6F3.P7
Fiat Iso Code: 68078A0452
I enclose a map that fits the hope that it will be of help to understand if the problem is them.
the egr ? closed well, maybe you should also put a small plate to close the valve, or ? only closed by the map^?
Closed only damappa
check if instead of mechanically ? was a little open. when you close a map, you have to be certain that it remains closed,this could be the cause.Originally Written by nuovaecu
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
I have to remove?
disassemble it all and clean it well x ? a casino in that car,do so?, just detach the electrical parts which are only two screws, you will find the cap of the valve tries to push it and see if it moves and takes the return and possibly try a bit of lubricant to unlock it, and see if it goes free...alternatively just tapparla with a sheet.
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
Hello nuovaecu!!
you can prepare the plate,
unscrew The EGR and does not accept from the cylinder head without removing anything, and stick to the plate ready!..
do not use sheet metal too thin or those cans you burn!
sorry for the shape a bit poor...
ori does it?
Ori does very little, almost not notice
Write permission
Quote