Elimination Fap ford focus 136 hp sid 803a

[pietro7529]

hi everyone, new to the forum but already? writing to some forum cip_tuning I wanted to illustrate how yesterday I was able to disable the Fap of a ford focus 136 hp sid 803a that surely ? interesting:
I disable the FAP, sw time, and funzuonato, I explain the procedure: read the map with magpro clone, changed with Time, after that I removed the FAP I opened it and emptied, closed it, and welded with a wire welder continues, I reassembled it all, I also reconnected the sensors, I loaded the map, I turned on the machine failure disappearance, I was diagnosed at the Ford, the result FAP disabled, even if I have to add that the sw Time works like all the sw clones to 80%
I attach the file that can serve as a study for all.

[magi1984]

the file does not work, you will not have lights are on but the machine will continue? to regenerate and the ****llo clogging of the dpf will continue? to climb.
Even ******* works on these cars.
The only correct solution ? do it in the manual, I have designed a file of a citroen without fap and one with fap to understand how to do it! I've lost a lot of time but in the end I learned. C'? a single bit that enables and disables the fap!and when bit ? touched in the correct way, the clogging of the dpf ? always at 0%

[motorsport]

Quoto the time it's not okay to erase the areas of the dtc, you have to check in the diagnosis ****llo clogging!!

[explode82]

that time does not function well ? right,but the *******h function very well on this type of ecu,avr? made at least a 15 without problems

[magi1984]

you're wrong, it does not work, ******* on these cars how does the time, delete the failures, but does not touch the switc

[explode82]

sar? was lucky all the times,but the fact is that are never go back, and have never had problems with any of the ****llo oil of white smoke from regeneration

[explode82]

I use the *******h,and I have never had problems on this car and on this model the ecu

[magi1984]

to see if it really works check the clogging with the diagnosis, again, if ? correct you are always at zero percent

[pietro7529]

Guys I redid the diagnosis Ford official, this time I even paid f...or, and I from clogging 0,0%, and the caption FAP not present.... for? I confirm two errors in dtc, and I'm at the point I don't care, then what I say is so much talk about it in the manual, the bit all the nice words, but no one has a file, and then the words go to the wind. I all my experiences in my small place. Of course I can not post the mod files, the drive that I do, why? I do not seem correct, but for sure being that before you put hands to a map I have spent a pi of soldini and reviewed and reviewed each file and with a few course a little something I've learned, I don't hide that for? they are not jealous of what I learn into the forum, I do not die with me, on the contrary, if someone asks me for advice in the PM I'm glad to give him a file studio, where you can learn. If we were all scientists, and we were not here to talk about. Then all and I say all rely on someone I for example this morning I made a Audi a6 2011 with automatic transmission 170 hp and we do not deny that I did make the map in the remote, always paying of course, and then I study it and the next we see....then place them golds in the appropriate section.

Has the diagnosis l,I made it yesterday morning, I would not like someone is thinking of where to fuck. He has made it on Sunday ansi good Sunday all...

[magi1984]

you say that you want a file to the study of nofap and then you yourself, for example, they do not attach the map of the audi you're talking about as a file of the study to the forum...don't you think it a contradiction???you want a file of the study, but not from your file study

the way I see it I have a file of study does not mean to have the gift of a gi file? modified and tested to copy the changes, what does not ? study, what ? copy and know how to do it all.
let's be honest...the nofap ? a business, gain, why? I have to lose hours and hours of my time to find the solution, and then regalartela?
you want the solution, bought the gi file? made and tested by another tuner who knows how to do, and you look at it. just like you did with the map of this audi that you speak of...? the same concept

now I'll give you the material on which to study, these are the two files that I have studied to find the solution of the nofap on sid803A
both files are original but one ? with FAP, the other is not.

this ? no FAP: http://www.professionalchiptuning.ne...4&d=1343716940
this with FAP: http://www.professionalchiptuning.ne...3&d=1366550197

good study, hi