Hi all guys, I might have an opinion on this map is made by me?
Thanks
Hi all guys, I might have an opinion on this map is made by me?
Thanks
Last edited by msport (exil77grande); 17-04-2013 at 14:38
you pull up to 180?
No becauseOriginally Written by SandroMarciano
why? the rail ? at the limit, can? be that at that speed? gives you failure with the beach suddenly. the rest does no damage, mod quiet...
Look, I don't think I've seen maps to the same drive that the rail ? increased by 7%.
what counts is not the percentage that matters but the maximum value, then I'm not talking about reliability?, but of recovery, caused by the fact that you have the last 2 curves of the time to 0, that relating to 1500bar and to 2000bar, then there are a bit scattered on the map that even the ones they send in the recovery.
The rail pressure does not increase the power, the council ? leave it original, or under 1400bar in a change to quiet like this
Can you tell me what are these bits scattered on the map?
[QUOTE=SandroMarciano;39226] ...I don't speak of reliability, but of recovery, caused by the fact that you have the last 2 curves of the times to 0, that relating to 1500bar and 2000bar... QUOTE]
The I told you how to change up next the rail, but take a curiosity?, are you sure that it will rise up to those ****lli?
I have changed indeed, and I have given a 4%..
07BD58 I found this, but I don't remember if there were other, you have to try to do a pull a 180 and see if the machine off (worn behind the diagnosis to remove the error). Of course you must also fill in the durve that I said to you that are missing.
Write permission
Quote