scania 164 480 bosch edc ms 6.2 how to read this ecu?

[sisco]

hello guys, someone's? how to read this ecu? the gallo2 says kline, but not the law. I powered up the controller to the tour chose the drivers that suggests the cock but I d? an error, and not the law, to be sure that it was fed right I tried to enter with scania diagnosis everything is ok, then I opened the ecu but I don't know which is which ? the port bdm , c'? something that is like us but I'm not sure that that is, attached the photos and the numbers on the ecu just in case the photos don't look good, another thing with the cock still in k-line I've ever read for? I wrote an ecu of an alfa 147 (k line), in the ecu c'? a 29f400bt (the mention of the cock 2 in his driver and ? present in the ecu) if someone s? as you f? or has some help and wants to help me thank you in advance, there are two other images that I can't upload

[sisco]

here are the other 2 images

[sisco]

this ecu also fits these vehicles

Truck DAF CF75 CF75.250
Truck DAF CF75 CF75.310
Truck DAF CF75 CF75.360
Truck DAF CF85 CF85.340
Truck DAF CF85 CF85.380
Truck DAF CF85 CF85.430
Truck DAF CF85 CF85.480
Truck DAF XF95 XF95.380
Truck DAF XF95 XF95.430
Truck DAF XF95 XF95.480
Truck DAF XF95 XF95.530
Truck IVECO CURSOR 10 440
Truck IVECO CURSOR 10 440
Truck IVECO CURSOR 13 380
Truck IVECO CURSOR 13 440
Truck IVECO CURSOR 13 460
Truck IVECO CURSOR 13 480
Truck IVECO CURSOR 8 240
Truck IVECO CURSOR 8 270
Truck IVECO CURSOR 8 310
Truck IVECO CURSOR 8 352
Truck IVECO EUROTRAKKER 310
Truck IVECO EUROTRAKKER 380
Truck IVECO EUROTRAKKER 440
Truck IVECO STRALIS 10 430
Truck IVECO STRALIS 13 420
Truck IVECO STRALIS 13 480
Truck IVECO STRALIS 13 540
Truck IVECO STRALIS 8 352
Truck RENAULT MAGNUM AE 400
Truck RENAULT MAGNUM AE 440 440HP DXi12
Truck RENAULT MAGNUM AE 480
Truck SCANIA SERIES 4 114 PDE 340 HP
Truck SCANIA SERIES 4 114 PDE 380 HP
Truck SCANIA SERIES 4 124 PDE 400 HP
Truck SCANIA SERIES 4 124 PDE 420 HP
Truck SCANIA SERIES 4 164 PDE 480 HP
Truck SCANIA SERIES 4 164 PDE 580 HP

[munro]

http://wiki.obdtuning*****/?title=Hauptseite
have fun....

[sisco]

http://wiki.obdtuning*****/?title=Hauptseite
have fun....

thanks munro at the first impact, I believe that the ecu that I am looking there for? I have to watch with ir? attention , anyway thanks again for the help

[legendaryslave]

sorry don't ? a 29f400 not, you can try to unsolder

[sisco]

what I don't know ? if you can read in bdm or if you have to unsolder the eeprom for read and write with some programmer's why? being beginner novice try first to look for information

[sisco]

hello guys I have seen that does not intervene more? no one, therefore, I infer that no one has ever done, which seems strange to me why? around there are a lot of vehicles of that type to the ecu changed perhaps dissaldano all of the eeprom, as it says in legendaryslave

[giuseppe1374]

post the pinout that you did

[sisco]

piedinatura2.JPGpiedinatura3.JPGthese are the connections that I have made, I have not connected the can as the cock does not require it in the driver, and I know that the ecu uses it only to communicate with the other ecu