Hi all..
as the title I needs your help..
I have to rule out the EGR valve from a 206 1,4HDI 69cv with EDC16c34
I can't find the address,
in the various guides posted in the appropriate section you speak of edc16c34 but mounted on 1,6HDI
give me a hand?
thanks a lot for the file ori is located here
http://www.professionalchiptuning.ne...8&d=1355018193
test so and post the results if it goes well we'll put it in the appropriate section
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Have you done it with time, right? I'm curious to know if it works....Originally Written by legendaryslave
done with my if then 500 we can get feedback from my files
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Better. We await the response then!
Great legendaryslave !!!
The EGR excluded 100%
only one thing abnormal, I do not understand why? the air mass remained unchanged 300-320 to a minimum and 760-790 max
in practice, this car had a vacuum with the valve open to 30-40% and then closing the acceleration it pulls fine
now improved a lot!
but usually excluding the EGR on other cars I had an increase in mass air already? at a minimum,
this has remained unchanged, however, be better and to work and went well!!
I am indebted to t?..
perfect
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
I cn qst engine I have a problem cn the map gives me error p0101 for the mass air flow sensor
On these cars when it works perfectly for egr off made a pair no problem
Write permission
Quote