key inertial electronic g.punto evo

[peppe82]

hello guys as the title I have a problem with a g.the punto evo 2011 mtj 75hp i.e., a client, and remained for a walk after that and took a deep hole. after a diagnosis with a launch I have seen that in the ecu, there is a error of the inertial electronic.I ask you an opinion, that if you are reading the ecu in the bdm and rewriting it I can unlock it?

[leandro89]

hello, you can try but I don't think you solve something, the block inertial should be a block of fuel and reset via the button or make this procedure
1. Key OFF
2. Key on,
3. Insert the arrow to the right,
4. Insert the bolt in the center,
5. Insert the arrow to the left,
6. Insert the bolt in the center,
7. Insert the arrow to the right,
8. Insert the bolt in the center,
9. Insert the arrow to the left,
10. Insert the bolt in the center,
11. Key OFF

but first erase the errors.

[peppe82]

thanks leandro 89 x the immediate response try now and let you know.....

[peppe82]

the machine and the game, and then you and rifermata.I go in the diagnosis and I deleted also the error xo now not most . in the parameters ec and the fuel pressure and the engine rpm ...... this bellaaa.... all things strange happen to me......

[leandro89]

gi? a positive thing ? happened ? game! try to check the status of the sensor of turns, and see if the fuel pressure in the outlet from the tank ? on 5 bars now I can't remember the right values each machine has its.
let me know

[peppe82]

okkk ok, I have disconnected the battery and I tried again the procedure everything goes in motion .my fear was that with the rooster v2 and it couldn't read and couldn't do it.seen that ? a euro 5 mtj.....

[leandro89]

I'm glad that you have solved the problem with the car. where are you from?
if I'm not mistaken, the cock 2 is quietly but I don't have the certainty

[peppe82]

I'm in the province of frosinone .not knowing the procedure x to unlock it I wanted to read it as a whole, and to rewrite the xo as mounting a 8df mtj I have not tried it immediately.

[leandro89]

I understand, with what equipment did you want to read it?

[FidodidoTuning]

The 8df not do with the rooster chinese