? can cut a file, e.g. read a serial port and cut it to upload it to the bdm ?
or vice versa?
? can cut a file, e.g. read a serial port and cut it to upload it to the bdm ?
or vice versa?
the first I don't think that is possible. And you can cut a file to write it to the serial line, see the discussions on the ecu marelli.
you ? possible, but very complicated for the simple fact that every programmer reads and writes to the area that the likes of + then start from a reading bdm to obtain a serial becomes a bit complex for my advice ? read and write always with the same tool if you are not ? safe to open and read in bdm,
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
quoto as you get your ass back to the place!!Originally Written by legendaryslave
What is a hare? A rabbit Abarth
I think that the thing is possible by bdm cut a file to write in the serial.
anyway I think that is a useless thing and that's great, I can see the sense in doing an operation like that.
almost tt the files are located is to do serial and is to do with the bdm.
Hello
To write in the serial file read in bdm, you do not need to do nula, just write it.
You can? to make the passage read at boot and then write in the serial, otherwise I wouldn't know but it seems to me unnecessary and risky, in the sense that if you can read it in serial, it is convenient to write in serial without risking to open the ecu.
On the Marelli, which can be read on the serial line read in the boot, then? (with the original in hand) you can write to a serial port without the problems as many times as you want.
not really, for example the mercedes a-class and b-class the reading that you do with the serial ? complete, to make it complete you have to do in the bdm, therefore read the serial can not write in bdm, but there are, however, of file ori to reset the ecu in bdm.
in fact, but the xch? you create this type of paranoia if you have the chance? read in bdm and better and better, and write back always in bdm, then if you read in serial ? reliable tool used write back always in serial, my advice, eusate within the limits of the possible, always the same tool x to read and write.
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
Hello
I don't think just say "cut a file that is read on the serial line to load it in bdm".......
The file that is read on the serial line normally are only the area of the maps, not a complete file, as if you read in the BDM.
But you are posible to restore each file that is read in the bdm (e.g. an ecu blocatta in scriture serial).
You read this ecu in bdm, only to need to merge the original reading is made of the obd, with the file corrutto here read with BDM.
Write permission
Quote