Hi, do I need to replace the framework for a new beetle tdi seen that ? was stolen, I found one at the belly-up and I wanted to know if to start the car ? enough to make a scodifica part of the engine control unit, or if there are other changes to make.
Thanks
It seems to me that to have an e2prom in the framework, you should reverse the changes so do the perfect clone
also with the scodifica total only thing flashes light the glow plugs, you can also do as he says angel inert 2 e2p of the picture so you get both the km that the coding and immo inalter
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
The Post is now old but I want to replace my picture for a problem that I cannot solve. I have one that is supposed to be good, how do I clone it? I see that there are 4 eprom nearby, which I have to reverse? all 4? thanksOriginally Written by legendaryslave
The problem ? the picture of the original the ? was stolen, the customer has found a to collapse, but without the keys, if there had been at least the ones he'd a close to the transponder did a partial on the ecu the engine and, in theory, started.
No, you should do a scodifica total on the receiver and then put the miles on the new.... at least I have always done the total in the case of the replacement framework vag.
But with the total you can't turn off the lights, plugs and immo why? usually remain lit, at least cos? I have been told.
Then it depends on the machine, usually remains only one of the tails on, but you can remove.....
if you have the vag, you can try to redo adaptation, on the vag does not exist a partial on the fiat ,I'm at the point total and a small piece of tape on the display if you have the commander or vagcom something you can do
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
you can also do partial, however, on some of the remains light the glow plugs are switched on and does not enter even in the diagnosis of some no light, and enters the diagnosis, the adaptation if you don't have the new tool does not do it, or you have to lower the km zero, and see the vag if you can make the adjustment if you have the vas does it automatically without code access
Write permission
Quote