Page 1 of 2 12 LastUltima
Results 1 to 10 of 11

Discussion: Clogging degree

View Hybrid

  1. #1
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280

    Clogging degree

    Hi guys, the other night I defappato a 159 1.9 JTDm 8V 120 hp with ecu Bosch EDC 16C39, HW_0281015163 SW_1037398255, with ecusafe, read tour and so far everything is simple and ok. I write the file in the ecu, and provo. I do a diagnostics to check the egr and the values of the fap and the clogging was at 0%. I'm going to go for a ride and everything is ok, I go back in the workshop, make the diagnosis, and I see the clog to 1000%. I take the file to the control and, in fact, the sw had also changed 1E46EE a bit, I'm going to see on the chart, and I find the curves that are also in the manual of the forum, then I edit the file and fill the values as the original, except for, and to compare the files and the curve is lowered as in the manual. I write the file I do the diagnosis and the clogging was still 1000%....!! It never happened to someone....????

    I attach the files ori and mod for a comparison.
    File Allegati File Attachments
    Last edited by msport (exil77grande); 07-03-2013 at 16:24

  2. #2
    Banned
    Date Of Registration
    Sep 2012
    The resort
    Piemont
    Messages
    432
    ecusafe on some of the sw busts a address the negative -6 if I'm not mistaken... it should be the last address that tap... what ? the volume of the DPF

    you have to put it back to the original......

    to the lighthouse to appear again at 0%, you should do sost.DPF through diagnosis

  3. #3
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    The address of which I speak ? the last....and I reported the original data....

  4. #4
    Banned
    Date Of Registration
    Sep 2012
    The resort
    Piemont
    Messages
    432
    I would take cos? that ? the way pi? logical,
    replace the original map, do sost. DPF diagnosis, replace the map without the DPF.

    Cos? doing it you will have all the parameters to zero.

  5. #5
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    Mmm......For another, the machine does not ? even in the workshop now....

  6. #6
    Banned
    Date Of Registration
    Sep 2012
    The resort
    Piemont
    Messages
    432
    Nothing will happen.... then back systems.
    If you're lucky with the correct data entered, you may adapt by only covering a lot of miles...
    But you can ascertain for yourself.
    Last edited by alfajtd; 07-03-2013 at 11:47

  7. #7
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    You, my doubt now was if I changed some of the data that pertain to the regeneration, but I don't think....

  8. #8
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    Citazione Originally Written by egs Visualizza Messaggio
    You, my doubt now was if I changed some of the data that pertain to the regeneration, but I don't think....
    I wanted to understand why you opened this discussion off-limits.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  9. #9
    THE AVERAGE USER (OF)
    Date Of Registration
    Nov 2012
    Messages
    1,280
    Sincerity????? I didn't know where to open the discussion...but what do you think?

  10. #10
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    I think that this is a particular section and not for everyone, and if you open similar discussions here do you not understand much.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •