nevertheless, the control unit 6f3.b1 what to read

[michele30]

you are struggling with an ecu nevertheless, 6f3.b1/hw04p/3542-b176 500sde 75hp dpf

a question, the maps are in the
m58bw016....

the codes in the injectors and the code are in the
mpc5634

serial E2prom cos'? I did a little bit of confusion for a moment.....

[carlo abarth]

e2p injectors!!

[michele30]

then in the serial eprom there are only the injectors?
then in the mpc5634 only code.

[autronica]

the maps are located in the Flash memory (m58bW...), and the file ? 2 mega
in an Eeprom 95320) is the code + injectors.... the file ? 4Kb...

[explode82]

and to conclude the speech in the mpc,c'? the part that analyzes and puts into practice what c'? in the flash,i.e. the mind

[sportknight]

The 90 hp is the bdm? And to write them you are with the mpps?

[msport (exil77grande)]

you can directly write with mpps and file cut to 1m.

[sportknight]

But the spansion, what are they? I still don't understand, the ones with the bdm does not make it right? Only jtag or I am wrong?

[explode82]

then the spansion are called so because the name of the memory that is called spansion, having said this,this memory is read only with bdm official updated and not with the clone or with jtag protocol,because they do not use that protocol

[sportknight]

In here,then remembered it well only bdm official and clones with jtag protocols, and only write instead?