open the eoc 17

[ecuboost]

hi, anyone has any suggestion to open a edc17 bmw? I've seen a video where to remove the mastic sprinkled the clean carburetors...any trick?

[marcusmagic]

heats up the unit very well on the sides,but without sporgeti too much in the middle! and after go solevvando slowly until the opening...scaldala with aereocaldo or phone...

[marcusmagic]

if you have the patience to open safely without creating internal problems!! and so,if the open so as I say,then when you close it you can not see even that was opened do not use all these chemicals that do nothing but harm to the ecu...and then a chore to get dirty...

[ecuboost]

then like the others...since I don't have open qst still...thank you, we can even close for me.

[chicco]

Use of the paddles from the filler to go under and pry, cos? there's no sign of it.

[marcusmagic]

if the warm well we don't need to do a lot of lever! you can also use a screwdriver Italian.*****o, and as the other..but be careful for a part that may be more low-do not force it too much for what and how a heat sink...

[ecuboost]

yes, the classic method...instead to read and write, I do it in boot mode with the gallo v2?

[chicco]

Which bmw we are talking about, or rather what edc17?I use Kess v2 to? yesterday a mini of 2012 edc17 112cv not recognized why? on the latest mini and bmw have changed the access codes and must complete the protocol.

[ecuboost]

Bmw 320 nn remember the year, or 2007, or 2009

[jolidj]

you need to be sure that mounting a edc17.