Info On reading and Writing Tour

[cinqueturbo]

Hello everyone!!!!
I would like to ask a lot of questions about reading and writing at the desk..
let's start by saying that or the ECU available edc15c7 & iaw5sf8.m4 & iaw59f.m3
feeding and plugging in k-line or com-line, it would be possible to read at the tour as a serial port?

[legendaryslave]

for the c7, you need to remove the e2p or riverginare to read and write to 5sf8 only in the boot and the iaw 59f the read and write with no problems, however, all of the ecu can be read from and written to the tour on the contrary, I would add that all the ecus from me conuscite can be read from and written to be disassembled from the car

[cinqueturbo]

Thanks to legendary..
can you give me more info?
the c7 enough to just remove the e2p physically?
for some stupid link for this ECU?
thanks a lot..

[klajdin]

the scheme of connection ? this, I can not post images with the cel so I put the link if against the rules please remove x please,
http://wiki.obdtuning*****/images/b/b1/Alfa_EDC15C7.jpg
on e2p I have no info, and I ask legendaryslave like never needs to be removed? in any way block the read/write or create other problems ?

[cinqueturbo]

the scheme of connection ? this, I can not post images with the cel so I put the link if against the rules please remove x please,
http://wiki.obdtuning*****/images/b/b1/Alfa_EDC15C7.jpg
on e2p I have no info, and I ask legendaryslave like never needs to be removed? in any way block the read/write or create other problems ?

I wonder the same thing..
but then remove it totally?
and what is the e2p?

[legendaryslave]

no, the e2p 95p08 must be completely removed from the pcb of the ecu, but only if you read the tour otherwise you can riverginare and resolder and get the same result, otherwise if you do not do this you are unable to perform read and write error by restoring yourself sed key

[gezame]

no, the e2p 95p08 must be completely removed from the pcb of the ecu, but only if you read the tour otherwise you can riverginare and resolder and get the same result, otherwise if you do not do this you are unable to perform read and write error by restoring yourself sed key

Hello
You exato, the e2p do not read the code of the key, you can leere-escribere, even in the obd.
Es is the car to the problem with the code key, it is not possible to do without removing the e2p.

[Gia]

no, the e2p 95p08 must be completely removed from the pcb of the ecu, but only if you read the tour otherwise you can riverginare and resolder and get the same result, otherwise if you do not do this you are unable to perform read and write error by restoring yourself sed key

even putting in the boot of the flash?

[sportknight]

but then to read them? mpps enough?

[explode82]

you just mpps,or any other programmer