Results 1 to 9 of 9

View Hybrid

  1. #1
    THE AVERAGE USER L'avatar di dvdtuning
    Date Of Registration
    Jun 2012
    The resort
    Frosinone
    Messages
    906

    bit of a switch for dpf off

    I would like to ask about the difference in processing the file with a software or modify only the bits of the switch?

  2. #2
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    well, the bit is only from on to off on the dpf while the sw acts on different things, many of which are not even should tap then the bits would be the most correct, in fact, now the edc17 you do so.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  3. #3
    Administrator L'avatar di admin
    Date Of Registration
    May 2012
    The resort
    Eculandia
    Messages
    708
    And like a light switch on on off off,wrapped, however, not just the bit to disable it, but you have to touch other things which pertain to the fap,and to do this
    you have to have the damos
    Unshared knowledge remains an end in itself.

  4. #4
    THE AVERAGE USER (OF) L'avatar di explode82
    Date Of Registration
    Nov 2012
    The resort
    NAPLES(CRISPANO)
    Messages
    395
    I would add not only the damos given that not ? that if they find who knows how many,but a nice p? of experience in the field and some dedicated software that you aiutoa to understand what to move
    GALLO ORI + KESS V2 ORI

  5. #5
    THE ACTIVE USER L'avatar di Backgroop
    Date Of Registration
    Feb 2013
    The resort
    Oppido Mamertina
    Et
    39
    Messages
    1,146
    Citazione Originally Written by explode82 Visualizza Messaggio
    I would add not only the damos given that not ? that if they find who knows how many,but a nice p? of experience in the field and some dedicated software that you aiutoa to understand what to move
    The dedicated software are created caused by the damos or A2ol, not sompre the dedicated software do what they need to do, wrapped with a touch of the curves or data similar to those from change..
    the only solution if you do not want to trust the software and want to figure out the operation, and that of the bump to the head making them manually, but always with the help of professional software such as ******* or winols with the help of the appropriate damos..

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    Excuse my ignorance, but what are the damos?
    you can find it somewhere

    explode82
    what would be the software that will help you in understanding what the move?
    I guess you don't mean es: ecm titanium or similar

  7. #7
    THE AVERAGE USER (OF) L'avatar di explode82
    Date Of Registration
    Nov 2012
    The resort
    NAPLES(CRISPANO)
    Messages
    395
    exact there? that ? was just said,but what more? important ? the experience that leads you to do well,given that not c'? a perfect software that will works all as it should without doing tricks manual..........and then sometimes there are areas that on the same model of car you are and the same areas, sometimes on the other car does not have to be done, why? give boredom
    GALLO ORI + KESS V2 ORI

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    708
    I understood that ? really difficult with these dpf , but where can I the damos?
    and how to use them?

  9. #9
    THE AVERAGE USER (OF) L'avatar di explode82
    Date Of Registration
    Nov 2012
    The resort
    NAPLES(CRISPANO)
    Messages
    395
    well, difficult ? to say " not honestly,anyway, what can I say ? that damos is almost impossible to find
    GALLO ORI + KESS V2 ORI

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •