Page 1 of 4 123 ... LastUltima
Results 1 to 10 of 32

View Hybrid

  1. #1
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    55

    Red face read ford fiesta 1.4 68cv with cock

    good evening to all, I came across a ford fiesta 1.4 68cv with ecu siemens sid 804 and I wanted to download it with the cock 1260, but I knew that I had to ground the pin 28 (if I remember correctly) of the flasheprom and I have a p? scared then, after you open the unit and locate the pin (why? the curiosity? has taken over ), I stopped for fear of any damage, any of you could kindly tell me if I can trust you to download it with this procedure??? and in the case in which damages can I run???
    thank you in advance

  2. #2
    THE AVERAGE USER L'avatar di FidodidoTuning
    Date Of Registration
    Dec 2012
    The resort
    SICILY (TP)
    Messages
    244
    let siemens is that the blocks
    change hw

  3. #3
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    I would also say that I do not do it with the old cock take a magpro or a rooster v2 and go quiet also because with the pin to ground in the past someone has burned the ecu.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  4. #4
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    55
    but if the old cock block because they themselves are the ones to tell you to do so, and you put so much of schema

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    salerno
    Messages
    351
    Citazione Originally Written by msport (exil77grande) Visualizza Messaggio
    I would also say that I do not do it with the old cock take a magpro or a rooster v2 and go quiet also because with the pin to ground in the past someone has burned the ecu.
    listen msport in the past, I was at the beginning too, I have made one with the old cock and luckily went' all is well

  6. #6
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    Citazione Originally Written by mafani Visualizza Messaggio
    listen msport in the past, I was at the beginning too, I have made one with the old cock and luckily went' all is well
    you will, I believe, but I have given personal advice on reporting my experience so to him I leave the final decision on the most popular things to do.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    salerno
    Messages
    351
    rightly ? he has to decide whether to dare or not ,you gave him a tip if he accepts ? well

  8. #8
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    55
    thanks a lot, could you tell me how can I download it without the bdm? I have only galletto 1260 and mpps v12
    are always pi? convinced to invest in these blessed 400 and broken

    do at least I can make my beloved scania truks
    Last edited by msport (exil77grande); 26-01-2013 at 00:20

  9. #9
    THE ACTIVE USER L'avatar di carlo abarth
    Date Of Registration
    Nov 2012
    The resort
    VESUVIUS
    Messages
    1,521
    go with the magpro I made a 10ina and go well !!!
    What is a hare? A rabbit Abarth

  10. #10
    Banned
    Date Of Registration
    Jan 2013
    The resort
    PALERMO
    Et
    54
    Messages
    39
    I confirm that I do not do it with the old cock I burned bad I had to repair from a fellow bad experience

Page 1 of 4 123 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •