Therefore, after the time that we follow the passion for this world of tuner ? increased to such an extent that he decided to do a spending spree buying a wingnut exactly this FGTech Galletto 2-Master BDM-TriCore-OBD I ? arrived in these days I have installed the soft driver and I went to read my ecu and everything finished with success, I ask, can I post the file to have an opinion of that map I have made and help me understand how to modify it to my liking?.
Thanks and I hope in your help.
hello,according to me you can post to, you will definitely have opinions to your map and some advice!!
You do not really understand something until you can explain it to your grandmother (Einstein)
Ok sorry, explain to me how to attach the bin file.Originally Written by motorsport
use the search that you find the guide posted on the forum for how to attach the file.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
ok I will try I hope I don't mess around.
I give you an advice, please contact the online store, no offense, or wait for some expert to give you some advice.
In the map you touched a little, and that little is also bad, the turbo cos? fact according to me you play it...opening the valve, leave it or...
Watch I am a beginner...but you see by the km ? all busted up.
You forgot to attach the ori...
Living without attempting it means to stay with the doubt that you could do it
OK I try to attach the ori just wanted to say that the map I ? was made by an offcina alpha.
Last edited by msport (exil77grande); 15-01-2013 at 00:06
Hello I ask too much of me to understand with the ECM how can I include and exclude the valve I am just at the beginning and then are totally ignorant of the changes.
Thanks
Port to 0, these addresses: 1C4B6E to 1C4B84 then 1C4C3A to 1C4C50 cos? you'll egr closed electronically, then after this operation, you can also close physically with a flange.
To bring it back to the ori selections the two addresses and click on the button in the top right that has an exclamation point in a red semicircle.
If the map ? still, my advice ? to lower the turbo 60-70 points and put ori the map in the ecm (I speak of the titanium) calls "a Percentage of valve opening".
For tips + specific you have to wait for some good samaritan pi? expert
Living without attempting it means to stay with the doubt that you could do it
Hi sorry but can you help me understand how to move with the ECM to find and change these values.Port to 0, these addresses: 1C4B6E to 1C4B84 then 1C4C3A to 1C4C50 cos? you'll egr closed electronically, then after this operation, you can also close physically with a flange.
To bring it back to the ori selections the two addresses and click on the button in the top right that has an exclamation point in a red semicircle.
If the map ? still, my advice ? to lower the turbo 60-70 points and put ori the map in the ecm (I speak of the titanium) calls "a Percentage of valve opening".
For tips + specific you have to wait for some good samaritan pi? expert
Thanks.
Write permission
Quote