opinion dpf off more mod opel zafira mjt 120

[fa2st]

hello guys,I wanted to know what you think of this file that I just finished editing... the fap off and been done with time,because they are not able to do it manually, the increases were made in the data following the discussions on the forum and now I wanted to know your opinion can this all work? thanks guys!!

oper zafira B year 2008 to 1.9 CDTI 120 bhp


thanks a lot guys!

[admin]

I am not on this n hw and sw to me and happened in the past to have problems on others not the time makes them well, I think if you try it out should you go into recovery, of course, I'm talking about DPF-OFF for the map, the increases are hurt don't do damage, and very, very soft and missing several maps including limiters booster turbo,q inett,etc, and then I don't understand why you've raised only the limiter in 2nd gear?

The test car falla warm up well and after a while you should feel that it starts to lose power until recovery

[fa2st]

I am not on this n hw and sw to me and happened in the past to have problems on others not the time makes them well, I think if you try it out should you go into recovery, of course, I'm talking about DPF-OFF for the map, the increases are hurt don't do damage, and very, very soft and missing several maps including limiters booster turbo,q inett,etc, and then I don't understand why you've raised only the limiter in 2nd gear?

The test car falla warm up well and after a while you should feel that it starts to lose power until recovery

thank you very much for the reply! could you tell me where am I wrong? so as to understand and correct..the limiter, the raised only in 2nd gear because the other gears, and already all the massiomo default. thanks a lot!

[admin]

thank you very much for the reply! could you tell me where am I wrong? so as to understand and correct..the limiter, the raised only in 2nd gear because the other gears, and already all the massiomo default. thanks a lot!

Take a file to the chroma 120cv processalo with the time and see what changes then grab your and processalo with the time and do a confrondo of the two on the eighth of the time it works then?

[fa2st]

Take a file to the chroma 120cv processalo with the time and see what changes then grab your and processalo with the time and do a confrondo of the two on the eighth of the time it works then?

hello admin,thanks a lot for the consoglio I try! and the problem is that 2d can't I do what I want, because I know little about ecm titanium and why I'm still gearing now a little bit... all the tests done so far to me it's always been done on a edc15,then I would say much more simple to do and understand...already on a edc 16 beginning to understand a little,because I think like many here are self-taught to say, I have not done it courses or anything.. so in addition to your precious help, lucky you, the professionals) only the passion makes me stay here to slam the head
now I'm looking for the file you mentioned and do a comparison!! thanks a lot!!

[fa2st]

Take a file to the chroma 120cv processalo with the time and see what changes then grab your and processalo with the time and do a confrondo of the two on the eighth of the time it works then?

the croma 120 hp and edc16c39....

I can not see the dpf off and the egr off in 2d on the file as done by matd82...

[matd82]

you have increased the values of the limit torque even when the car ? off.
parts from 1500rpm
ditto x prex rail and injection times.

I made a map as an example, try it
I kiuso egr.
the fap ? off.

[fa2st]

you have increased the values of the limit torque even when the car ? off.
parts from 1500rpm
ditto x prex rail and injection times.

I made a map as an example, try it
I kiuso egr.
the fap ? off.

thanks a lot, I'll ask you gentilemteuna thing: the fap off and the egr off I see them in 2d if I compare your example, and the original file? because honestly my obbioettivo and make them manually,but of course I also have to figure out what I'm doing...

[admin]

The fap is not done in the proper way on this type of hw and sw time ago shit you've also forgotten 0E29C2 negative to fix it

[fa2st]

thanks a lot guys!! tomorrow I try to feed eil file and see if it works! the file that I posted are not sure for what,but the coffee machine, and a mjet 120cv dpf so I think it's similar. as soon as I get the cock I download the file from the machine in question and try thanks to matd 82 for the example posted,I'll try to see where you have acted, even if in 2D I don't even know how do to mod...