Identify driver

[panterargento]

Good morning to all.
I wanted to know if you can? go back to the file ORI having the MOD and therefore create it?

[magi1984]

with the mod you can go back to the original in most cases, but create an original file from scratch by modifying the mod ? impossible!

[panterargento]

with the mod you can go back to the original in most cases, but create an original file from scratch by modifying the mod ? impossible!

I ask this because? the ORI me has released the trainer that I did the remapping, so I read his MOD I've made some alterations to which I have already? written, but my doubt ? what if the ORI is actually? of my car.
I am attaching the image of the info of ecm titanium + the GOLD you gave me and the MOD that I have read.

[magi1984]

now I understand what you mean.
the original gave you ? a reading of the TOTAL, while the mod that you read it yourself ? a partial reading, that is ? only the part with the maps
both files are correct, let's say that if you do some damage with your mod, you always have the reading of the flash total to reset the ecu

[msport (exil77grande)]

I confirm what has been written by the magi,one bed bdm at the other bed in the serial so you can safely load the sw ori and mod and make the changes you want then when you save everything you find your mod files to read on the serial line with the changes made by you and if the parts directly from the file ori surely you have problems in writing the bedroom area is complete with respect to the one cge law mpps that it is partial.

[panterargento]

I confirm what has been written by the magi,one bed bdm at the other bed in the serial so you can safely load the sw ori and mod and make the changes you want then when you save everything you find your mod files to read on the serial line with the changes made by you and if the parts directly from the file ori surely you have problems in writing the bedroom area is complete with respect to the one cge law mpps that it is partial.

But to read in the bdm is not necessary to disassemble the unit?
I was present when he remapped, has not removed anything, read the ecu on the serial line in about 5 min...
I doubt that the file you gave me is not of my car...

[msport (exil77grande)]

But to read in the bdm is not necessary to disassemble the unit?
I was present when he remapped, has not removed anything, read the ecu on the serial line in about 5 min...
I doubt that the file you gave me is not of my car...

that the programmer used to read?
it might not be the file that you have read from your machine but you are not matter because having a serial reading of the mod, and being the same hw and sw, you can safely make the changes you want by loading both golds that mod and the mod that will save as I wrote just above will always like what you read on the serial line, but with the new changes made by you.

[panterargento]

that the programmer used to read?
it might not be the file that you have read from your machine but you are not matter because having a serial reading of the mod, and being the same hw and sw, you can safely make the changes you want by loading both golds that mod and the mod that will save as I wrote just above will always like what you read on the serial line, but with the new changes made by you.

I have to be honest I have not been able to interpret that the programmer used to read, I was a few metres away and I didn't want to be invasive...

[panterargento]

So if I'm going to map from scratch, starting from that file at the time of writing the pu? stop responding?
C'? a way to check that the file is a total read?
Pretty much if so? it would be a true backup if I'm not mistaken, but how to ensure it?
A total read from the press and would always come in handy in the case of the block right?
Guys sorry for the many questions...but ? to take away all doubt...