Hello all, I wanted to ask the pi? experts and also the less if they have never touched the timing of an overboost and what results they have achieved with the edit.
C'? who says that you do damage, and c'? who makes a simple change map type turbo to increase the opening out of the turbo...
for what it's? I change to an overboost and do if you s? how to make her acting especially on the pid control initially and then on an overboost map....
if you do not act in this way, the press turbo not follow? never as much as we say we do..
usually do not touch them ever, I tried it on my car to touch them, and at first sight, the car was more? reactive because the turbo was under pressure before, and more? for a long time...for? not ? the case of touching them, according to me, on standard maps
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
from my experience I can tell you that if it is the original machine with only a map and you want to do something more particular and complete should touch them, but not much, and on the condition that the pressure is not excessive, otherwise the peak squirts too high,if it is machine processed type turbo plus etc you can raise but you have to calibrate all monitoring pressure constant, and the peak would otherwise do damage easily.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
the fact ? that you can't? reduce all in favour of, or opposed to change an overboost....
the question and far more complex ? it deserves an in-depth study....
this ? just my thought on the topic.....
good continuation to all...
In fact, my I mean ? know if they modda, and those who do not modda does so with full knowledge of the cause, having done the tests and trials and their theory....? normal that the change must be studied in detail!Originally Written by munro
I answer for as I want the car, I would like the turbo pressure constant and an overboost I honestly do not care a lot, when I ask for the power I want, and not only for 3 seconds. It was nothing for me an overboost
in your case you can also moddare the negative an overboost.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
do not you touch me you're not working on the pressure that I know of
on what then? that I know works on geometry, so do you want or do not want to go to vary the pressure peaks....
Write permission
Quote