hello everyone, in the meantime, i offer you congratulations because? ? for a while that v read, and I must say that on this forum c'? people ke knows to pakki!!!....and then you start to take advantage of a little
I ask that hw and sw would you recommend for me to purchase it to remove the dpf and egr in a volvo v50 2.0 D 2006, clearly also the economic side has its importanceme the cable with a hundred euro???
then, as already said in the pm, your ecu may be both siemens sid 803,both siemens sid 803a and both siemens sid 206 so that you can not use it mpps ne magpro obviously clone because the official magpro2 the ago with no problems and then according to me you should go on the gallov2 so you can try on the serial line, and if not go to bdm,in addition to the luca stanca you need to contact a professional because I don't think it's so easy with a crack delete it on that vehicle.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
ok, but a gallov2 how much can I find the price?... this could go well?
http://www.ebay.it/itm/Programmatore...item23246a9e32
c'? any particular reason why? nn you can program the ecu via the obd?
thanks for all the info!!
Last edited by strady77; 04-11-2012 at 10:25
the cock v2 as discussed in a few posts here on the forum and is always a gamble, if you do not know where to get it, in fact, we have done some tests and we found the best price and quality,one you indicated both for the price and for other small details, I know that it is the worst in the sale.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
ahhhh let's start well, but what are the differences between the gauls and the low-cost, and those from the middle millino?Originally Written by msport (exil77grande)
if mounts siemens sid 803 the only write but to read while bdm from 803a then read and write
Write permission
Quote