It is the second time that I have to write a EDC15 C7 Alfa 156, and any modification I do to the car goes in motion then cuts out. I suppose it is a problem of incorrect checksum.
Can you give me a look at these files that I am attaching to see if there is a problem of the correction of the ECM or in writing of the Ks. Don't ask for opinions on the changes as they are tests to verify that the type of problem. Thanks
checksum and ok 100%...
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Strange then how ever the machine is powered off?. Now I try to rewrite a file ORI downloaded from the network with the same HW and SW that I have seen on the ECM to me by a number of Cksum is different, then I do not understand what you indicate. It is the second time that happens to me and I would not be a problem in the cess... which I use. If anything, try it also with chicken.
Meanwhile, thanks to cinqueturbo.
the cks as already said is ok , but I ask for the changes from 078302 to 078344 took? try to replace the original that piece of the map and try again to write to the file to see if it goes in the bike.
ugo ---- president A.E.P.
Great BOSS. It was just the mod indicated that it gave problems. I don't understand how that can happen. Practically, these curves are modified by the ECM. On a file with the same SW and HW downloaded from the network, the change takes place regularly, with that read from the ECU you bust. Why?
Now that they are in dance, I ask you to take a look at this MOD, the car goes a little better but not responding as it should. Perhaps the values of mod are approximate, but after various tests I am not convinced. The car has a strong turboLAG, perhaps also due to the change of the turbine with a a bit bigger, but I can not retrieve . I do not know that there is a torque limiter further. Do you have any suggestions? Mass air flow sensor , pressure sensor and air filter and oil new. Thanks
You.... but if you do not attach files , CAMPA CAVALLO!!!
I don't think that ecm modififchi from only those curves, very likely a fast passage mouse, and already happened, in any case, if you put a turbo bigger then you can not complain to the turbolag, these engines if left ori change well and give excellent results.
ugo ---- president A.E.P.
Write permission
Quote
