Hello all I wanted to know if on the map there is a precise point in order to have the maximum torque, for example, at 1500 rpm rather than 2500, or you have to change several points
how to increase or decrease the no of turns which have the peak torque
Hello all I wanted to know if on the map there is a precise point in order to have the maximum torque, for example, at 1500 rpm rather than 2500, or you have to change several points
Of course it exists..
if you want real help you should post the file ori
or at least give us the maximum amount of info on the vehicle,type of engine,type of ECU, etc..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
you're right, sorry I attach both the files to read with the cock that made chart with vag (which I don't know how much it can be trusted) as this is 149 hp (usually between an update and the other could be 127-132 max), and the couple always 306 nm, but in this case is the highest, whereas before it was more low as n of spins (which is now a shooting more progressive and linear , while before you attacked the seat)Originally Written by cinqueturbo
my problem is that a sudden drop in power which you cannot solve after the 3790 rpm (which I think is also the reason why I can not do most of the 190 km/h although it should have been deleted the speed limiter
seat altea 1.6 105 cv pcr2.1 after update dieselgate ( I forgot to write it in response to your question)
Aaaaa but you are always you!!! one of the Dieselgate!!!
But you want to convince you that your and an ECU is relatively new and not all chew it well the Siemens?At least I will..
I told you to go to the children of the Professional for obvious reasons..
who knows these ECU if you opened up the skull to learn them and it is unlikely you will see to disclose information on
or has purchased the solution, however, and it is unlikely you will see to disclose information on
I hope I'm wrong and we'll see if someone replies..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
On my map can you tell me the prex of the turbo because it is set?
I know I've already asked, but since my fear (having a rooster clone, and having never written a unit ) is that one to block to the control unit x to I made another test with what I had taken from the fap but as you may have seen there is a sharp decline nn I can understand the reason ... x what I am doing to do several attempts ( and then also the problem is that the file golds that I have is the bed with the newgenius and on my read with the gallo file service online would prefer to avoid to put the hands on this site too botched
I did not catch the address of the file ori..
1 You need to make the release tour for writing "if you have not already done so after update VAG"
2 take a reading with the instrument and send the file
thing and that is not right on the file?
in every way I am attaching two files to keep you busy enough not to make you write again Dieselgate...
P.S. take these info with the pliers..
if someone wants to help we are here...
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
I'm going to order so I don't do casino
Then x to write the file to the preparer with the newgenius write it via obd so I would say ke is unlocked
X as regards the reading I have done, but since she has already been touched by others in many points dani has said that she would prefer to work on the file ori and not on the mod , and with winols I put the file of the newgenius on the bed by cock 2 mb with the hope that it will be right
Then tomorrow I open your file and see if it is equal to the one developed by me and I send you
181E94
1B2B02 1B2D04
1B728C 1B73B6
1EBDD6. 1EBE1A
1EBE56. 1EBE98
can you please tell me these maps to what you refer? there is a mappack that way?
Quote
