Hi guys the other day I went to write a edc16c39 and kess gave me the code to write the wrong and I need to be sicero I had made on the same ecu. Then I open the ecu do the backup, and at that point ksuit asks me to separate the files . Separate files will open the flash read by bdm and the one read from the socket were different.someone can give an answer to my questions?
Brand & Model of Car etc?Originally Written by salvatoreragonese
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
apart from that when you ask for something you need to try to give the most info possible, is different, very likely because the obd has only read the zone maps from port bdm reads the whole flash full.
ugo ---- president A.E.P.
Guys forgive both speak of a lancia delta 1.6 . Regarding The flash, if floor the two maps. Example the rail to address "X" and the same for both? Let me explain, the starting point has the same address or different? From what I noticed the files have the same size
certainly you can stack, the address is the "real" of the flash.
the only difference is that in the one read from the OBD to miss certain areas of memory
I repeat , you are missing the whole area of the management of bed in the obd, you have only the area of the maps.
ugo ---- president A.E.P.
And the entry security code is incorrect what can it be?
Thanks for the replies guys
sometimes the kess says as meaning that the code immobiliser is not correct.
the car goes in motion on a regular basis??
sisi all correct, but it is not the first time that I do this "joke"
every so often you have to lower the communication speed from the menu "setup" (I don't know how it is in eng) who find when it asks you if you want to do id/read/write etc
Quote
