Hi guys I have a problem with the failure of the glow plugs of a Fiat multipla 1.9 mjet 120 hp. On the drive in question have been already changed the 4 glow plugs and replacement of the module of the glow plugs,he also checked the wiring which is ok.The light blinks to turn on and the glow plugs do not get voltage.By controlling the power supplies that come in the form of the glow plugs I found the following values to the framework, on: a positive 12 v,a second positive to 11.5 v, and a third positive at about 3.5 v, and of course, a negative. I have noticed, however, that these positive remain fixed in time,but at least one should be of the command for the ignition of the glow plugs themselves, and then present and then end...I was wondering if anyone had a pinout for these modules fiat given that they have not managed to find it on the network...the customer is not able to leave the car is expected to return as soon as he can, and I would like to fix everything.a last info,if the command from the diagnosis to the activation of the glow plugs, these are fed properly.thanks to all