Hi guys,
I have a question regarding my friends 147 Q2, пасля remap that he had on it, the car want go more than 190км/ч, and the fuel consuption is too прывітанне, up to 12л.
Хто-небудзь generous to look at the map and tell me whats wrong?
Ori and mod file are in the attachment
remapped file is made very bad.
about 95% of your modification, are out of range, means that the range мадыфікаваных are not interested during normal driving of the car.
and if driver is not driving with accelerator full floor , car is 100% as production.
very soft and not the necessary modfications pressure of common rail.
Thanks allot, I will try to reduce rail pressure.
Im thinking about also to reduce the maps for injection 10% and duration map, but what віны, так як me is that the turbo pressure is increased just a little bit.
Any suggestions about reducing?
fuel consumption is not affected by any of your modifications.
may be is increased only because you are driving fast and strong searching for performance hard to find.
max speed is not increased because you don't drive in the points you have changed
fuel pressure return стандарт.
ін'екцыі map is good increase value but extend more wide the increment
turbo is not bad
Ok, i will lower the rail pressure to the standard, injection map will wightend through the whole table.
Max speed is affected by what map? I saw that the max speed limiter is left as standard 299,99.
Адказаць, Цытуючы
