Hello everyone, I just noticed that the pink wire of the cockerel v54 in my possession is not attached , I have not yet tried to see if it works for fear of making a mess do you think I can throw it away or rose cable is not important? 🤔
Hello everyone, I just noticed that the pink wire of the cockerel v54 in my possession is not attached , I have not yet tried to see if it works for fear of making a mess do you think I can throw it away or rose cable is not important? 🤔
you have to see where to go on the side of the obd2, and then I can tell you what to do..
with tester see if and wired, and give me the number of the 16 pin..
however, you have to fix the socket otherwise it will drift away all slowly
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
1 in that sense, where it goes on the side of the obd2? I know that goes along with all the other wires inside but I do not know where is connected .Originally Written by cinqueturbo
2 unfortunately I do not have the tester and I could not even see if it is wired, and what numbers are you referring to
3 when I will be able to understand the first 2 points, maybe I can fix the socket :-)
Hahahaha
this and the obd2
connector obd2.jpg
this is the pinout of the obd2
connector pinout obd2.jpg
this and the rs232 socket that you need to open and secure the cable with the hose clamp tightening this to the internal
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Hahahaha
this and the obd2
connector obd2.jpg
this is the pinout of the obd2
connector pinout obd2.jpg
this and the rs232 socket that you need to open and secure the cable with the hose clamp tightening this to the internal
outlet RS232.jpg
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Even as the arab does not understand it (even if I attach the schemini ������ ) do you harbour ������������������
see if the colors of your cable correspond to those of the photos that I sent you
ok as soon as I arrive home control thanks
this morning I woke up and I thought the speech of 5turbo, and maybe I arrived at the meaning of the phrase "with tester see if and wired, and give me the number of the 16 pin." wired quol say that I have to attach it to the pc and see what is the pin that has the current (or am I wrong?)
no, wired does it say if it is connected to, do, get a multimeter and stripping a piece (at the tip) of the wire in question, connect a test lead of the multimeter to the piece stripped and with the other lead touch one at a time to pin-plug obd which is located on the other side of the cable, when the meter sounds, it means it is wired, if he is not playing is not wired, (of course, you'll need to set the multimeter on the scale of the hom where there is the function of the sound when you connect together the 2 tips with each other).
sorry if I have entered so much into detail but since you said you do not have the tester (multimeter) I don't know how you know how to use
you have done very well since we took you in full, do not know how to use ) so I thank you for the explanation I get the multimeter and do the test thanks again
Quote
