Opinion reading point 70 hp

[riccardo59]

Hello everyone I wanted to ask you, I read with the cock v54 a point series II ecu 55195817 mjd6jfhw01b sw 1065p350 took about 1 hour to read it and gave me a file, 2.50 mb has not given me any error ? normal or I have the wrong driver in reading it

[cinqueturbo]

Hello everyone I wanted to ask you, I read with the cock v54 a point series II ecu 55195817 mjd6jfhw01b sw 1065p350 took about 1 hour to read it and gave me a file, 2.50 mb has not given me any error ? normal or I have the wrong driver in reading it

Normal..
and reading eeprom-mpc-flash to get it to accept the ir? known sw of edit you have to cut it..

Step by step guide of how to unzip files and compact 2.5 mb 2mb 1mb 512kb nevertheless,

I do not know if ? the right section and I have to say that not scream and just to be pi? clear and uncluttered, I posted a guide created by me to unzip and compress file, nevertheless, to be able to use the cock in serial or mpps or bdm...


OPEN THE SW TITANIUM,SELECT THE TOOLS MENU
CONVERSIONS,CUT/PASTE FILES.
BROWSE THE FILE, 2.5 MB,CHECK THE BOX (DEFINED BY USER) AND SELECT THE FOLLOWING VALUES ON THE BASIS OF WHAT YOU WANT TO ACHIEVE:

2MB 2.5 MB
BEGINNING 080000 END 27FFFF

1MB 2MB
BEGINNING 000000 END-OF-0FFFFF

512KB REMAINING 2.5 MB
BEGINNING 000000 END-OF-07FFFF


TO SHRINK THE FILE IS 2.5 MB AND TO BE ABLE TO WRITE IN SERIAL WITH THE COCK,RUN THE TOOLS MENU,CONVERSIONS,CONCATENATES 2FILE AND ATTENTION TO FIRST SELECT THE FILE TO 512 AND THEN THE 2MB.THE ECM WILL SAY THE FILE IS TOO LARGE BUT EQUALLY CONFIRM AND YOU GET THE FILE, 2.5 MB

if in doubt email the file cloth cutting but I still can not download anything.. n another p?..

[ugoboss]

for me, you were wrong to select the read, the 70cv has the maps in the micro and ? about 500kb (depending on what you read) then we e2p, 4kb, but to get to 2.5 mb ec want it, try again, and select the right car.

[cinqueturbo]

for me, you were wrong to select the read, the 70cv has the maps in the micro and ? about 500kb (depending on what you read) then we e2p, 4kb, but to get to 2.5 mb ec want it, try again, and select the right car.

Or gosh to the right..

[tecnoracing]

I ugoboss with the cock, you should read 448kb flasks

[tecnoracing]

or the tables 64kb always on the 70cv

[franco75]

In a panda equal (Marelli mjd6) I have read only tables 64 KB

[riccardo59]

Thank you so much guys we tried again to read it, and I know