Page 1 of 2 12 LastUltima
Results 1 to 10 of 11
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109

    Opel Astra H 1.9 starting problems

    hi all!
    I don't know if it is a common problem but I can't seem to get to****...
    Car: Opel Astra H 1.9 2004
    The car does not always start:
    you have to turn 2-10 times the key in the framework for starting the starter motor, and then leave.
    Once a match , turn the key without estarla the drive part;
    if, instead, it extracts the key starts the problem...
    I disassembled the engine ecu as the diagnosis gave me intermittent signal can bus with ECM and I have found traces of water in the ecu, cleaned, and cleaned the welds, the problem remains...
    to someone ? happened to you?
    I thank you in advance

  2. #2
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    I would check the ignition switch of the key..
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  3. #3
    THE ACTIVE USER L'avatar di carlo abarth
    Date Of Registration
    Nov 2012
    The resort
    VESUVIUS
    Messages
    1,521
    in diagnosis that gives you the????
    What is a hare? A rabbit Abarth

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    can bus signal intermittent with ECM...

  5. #5
    THE AVERAGE USER L'avatar di Alessio93
    Date Of Registration
    Dec 2013
    The resort
    squinzano
    Messages
    257
    I would try to reset it and reprogram the codes of the 2 keys

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    the machine brings the encoding on the light switch behind the steering wheel...prover? to encrypt another key...

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    replaced the ecu the problem start ? resolved...
    now it's for? the calibration of the steering angle...obviously in the dismantling of the cim is sar? moved the cap that contains the spiral cable...
    better to try to calibrate it manually, or you can try with the diagnosis?

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    if you have the tech2 you put in less if no manually. I don't know if other diagnoses.

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    manually means to find the point of the original cim right?

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Oct 2013
    Messages
    109
    you can't calibrate...
    the light remains on, but it all works... does not accept the car pass for calibration, with a tech2;
    and once disassembled, it is centered...
    advice?

Page 1 of 2 12 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •