Edit DSC Bmw e46

[piazzarolo89]

Good evening to all guys, I had a question to ask you. And you can modify the parameters of the DSC on the e46 ecu?

[piazzarolo89]

Guys nobody knows nothing?! YES NO MAYBE? Practically explain what I would need, the system has 3 ****lli intervention:
1? All the controls placed;
2? Controls included, but much more? those who leave a slight margin of sideslip and simulation of differential drive-blocker, thanks to the intervention of the rear brakes that brake the spinning wheel;
3? No control, no? in the event of a skid, no? in the case of spinning wheels, no? simulation of self-locking differential.
I would that in the 3? ****llo there is, however, the function of self-locking, but without anything else. You can? do?

[marco_evolution]

you ? an electronic control unit then commanded/managed to force from the ecu the engine..you Should lose a bit of time having the damos and find it..it will be? a nice job, but I don't think it is impossible...if you post the file we can go looking for a damos and let's strive to put into..I have a e90 quite similar to me might be of interest to me

[piazzarolo89]

Hello mark, thanks for the much-awaited response, a pious soul, who answered me! However, I don't even know what the damos, my "knowledge" of reading control unit stops the use of "torque" on androind via the bluetooth interface.. In every way would be to copy the instructions that reads the ecu in step2 and paste them in the step3, by removing the unnecessary and leaving only the simulation of the self-locking.. sounds simple type, the copy/paste on a word document to do so I wouldn't know where to start... if I knew anything about aggiornami.. thanks!

[marco_evolution]

The damos ? the setting for a car in particular you ? specified what to ec written byte-by-byte...