Hello all, I would like to know if replacing the turbo pressure sensor with another that is capable of reading a higher pressure has to be adjusted a few bits in the map to be able to read a higher pressure.
Thanks to those who help me.
Hello all, I would like to know if replacing the turbo pressure sensor with another that is capable of reading a higher pressure has to be adjusted a few bits in the map to be able to read a higher pressure.
Thanks to those who help me.
There is no one that I can answer?
To be modified bit-restriction and atattata the map sensor. To be informed all over the map where required
The patience and virtue of the strong..
Hi thanks for the interest and see if I'm right:
Map sensor: 0F82DA to 0F84D8
Bit limitation : 0F8BE8 and 0E646C
The problem I have is that in the diagnosis the maximum value that I can read is 1520 mbar, while the pressure gauge reaches 1700 mbar. I have changed the APS with one that reads up to 3.07 bar absolute, but in diagnosis I read a maximum of 1.52 bar. Clear? If the bit limitation that you say if is not listed you tell me where can I find it please? The ecu is edc16c8.
I must act here to linearize the new sensor?
Thanks
To be modified bit-restriction and atattata the map sensor. To be informed all over the map where required
we wanted you to know this, if you do not want to help not to make known, thank you.
if I can be useful I found in my pc this file with the addresses of your map let me know
Alex
those that you listed are the map main prex turbo, and the limitations on the turbo. are not the bits for the adjustment of the map.Originally Written by PasqualeGt
the map the original reads up to 3 bar absolute, and then 2 related. if you get there it is because you have set a maximum pressure of 2.5 bar absolute. to me it seems almost obvious
with the turbine not the original I suggest you go over this threshold
Hello Alex, I am of Scafati. Thanks for getting back to me. I'm sorry but I can't download from this site, they have given me the 'permission'. Not can you post what it says please?
Easter hello recently I moved to anytown almost close to it, but for work I find myself in san giovanni a teduccio I don't know if you know the area, returning to the topic, I hope to do something pleasing:
Address Name Size
$E12BA Drivers wish to 16x16
$E14FE Drivers wish to 16x16
$E23B4 EGR 16x16
$E25F8 EGR 16x16
$E924C IQ limiter 16x16
$E9B7A Smoke limiter (16x16
$E9DBE Smoke limiter (16x16
$EBF1A Temp limiter 8x8
$F4DC2 Duration map 20x20
$F6A02 N75? 16x16
$F6C46 N75? 16x16
$F6E8A N75? 16x16
$F7112 N75? 16x16
$F7356 N75? 16x16
$F82DA Turbo 16x16
$F851E Turbo 16x16
$F8762 Turbo 16x16
$FB4A0 Inversed drivers wish to 16x16
$FC61E Rail pressure 16x16
$FC9B6 Rail limiter 8x8
$FCA64 Rail limiter 8x12
$E3DC8 EGR Hysteresis 25x1
$E3E2E EGR hysteresis 25x1
$E3E94 EGR Hysteresis 25x1
$E3EFA EGR hysteresis 25x1
$E8E7E Torque limiter 25x1
$ED60C SOI 16x16
$ED850 SOI 16x16
$EDA94 SOI 16x16
$EDCD8 SOI 16x16
$EDF1C SOI 16x16
$EBEDE IQ limiter-12x1
$E9188 Temp limiter 8x8
$F89E8 Atm pressure turbo limiter 16x16
$FBEBA SVFPL 1x1
$EA006 Smoke limiter (16x16
$EA24A Smoke limiter (16x16
$E2838 EGR 16x14
$E2CCA Map "Bosch II 16" 16x16
$FBEE4 Rail pressure limiter 4x1
$FBF0E SVFPL 1x1
$FC156 Rail pressure 16x16
$F8BE8 SVBL 1x1
Alex
Quote
