reconstruction file bfm ford fiesta 1.6 tdci

[Gianpy80]

Hello guys, I have to resurrect a edc16c34 (fomoco) ford fiesta 1.6 tdci 90 hp that has blocked one of our colleagues trying to write it in serial. I read in bdm, but on this type of ecu you can pull out only the backup (full flash + e2p) so now I have a file obd corrected and a backup bdm in which the flash is corrupted. Who is giving me a hand to create the backup file right from rewrite? according to you blocking it you may be corrupted the e2p? just to be safe because the machine is cel I and is approximately 600 km away
code hw is 0281011612
the sw 1037375124

[cinqueturbo]

Here is the file BDM rebuilt..
You and happened to a colleague of the colleague who lost the variants type changing the type of the arrangement of the DPF and code INA injectors..
Brought the Lexia that resolve surely..

[Gianpy80]

It has happened to me sometimes.. Thank you very much, very kind as always 😉👍

[cinqueturbo]

When you solve loads the file golds in the bank data will be useful for others..

[Gianpy80]

cinqueturbo the files I've posted I saw that by 2090, but is the full backup or just the flash?

[Gianpy80]

ok, I think I have succeeded, only that in copy your file and e2p, which I pulled out from the backup I believe that the e2p is corrupted because the file that I pulled out I was 4 kb, but now when I open I recognize the family of the ecu and gives me access to the individual readings of flash and e2p if I try to read it gives me a file that is 8 kb. In fact, when I wrote the backup, rebuilt on the site of e2p gave me an error on verification. If I try to delete the immo passing the file to the flash with time you say you which to solve?

[cinqueturbo]

cinqueturbo the files I've posted I saw that by 2090, but is the full backup or just the flash?

ok, I think I have succeeded, only that in copy your file and e2p, which I pulled out from the backup I believe that the e2p is corrupted because the file that I pulled out I was 4 kb, but now when I open I recognize the family of the ecu and gives me access to the individual readings of flash and e2p if I try to read it gives me a file that is 8 kb. In fact, when I wrote the backup, rebuilt on the site of e2p gave me an error on verification. If I try to delete the immo passing the file to the flash with time you say you which to solve?

Stop All of this and a compressed file of BDM??

[Gianpy80]

Practically in the first post I have attached a file to winrar where I put the reading from an obd that has made the link before you lock it and the full backup file that I pulled out I In the bdm and in which, of course, the flash part was damaged. It is locked, in the bdm, but I recognised the family and gave me the opportunity to do only reading and writing of the full backup. So I am using the tool bdm 100 I have divided the backup and pulled out the file e2p that it came out of me by 4 kb , and then I united with the files I've posted you re-creating the backup file, and I wrote it. When writing to the flash part worked fine, but the e2p gave me an error In verification. Now when I enter in bdm, I immediately recognized the family and I do not do the readings separate, in fact if I read only the flash gives me a correct file that I open quietly, but if I read the e2p, I pull out a file from 8kb completely different from the one that I pulled out I from the backup. For this, I think, if the horsemanship so despite being in place as a flash, the machine will give error immobilizer.

[cinqueturbo]

When the BDM is not recognized by the family of the ecu you what you've selected????
The Post l read of the E2Prom 8Kb which is its exact size

[Gianpy80]

I selected bosch ford but I think I have it wrong, because now I recognize it as a kia and peugeot.. With the PSA group, there is always to become fools.
I am attaching the file to 8 kb that I read now,